ChrisCwmbran
Experienced Member
Hi guys,
Need some advice. My Olivetti M24 has been connected to the mains power and it's monitor today for the first time in many years. Doing the testing, the machine is fitted with it's HDD controller card, but the cradle with the HDD and FDD are removed (and obiously disconnected).
When powered on the machine flashes it's keyboard LEDs for a few seconds and then beeps but produces no display at all. The monitor is the monochrome M24 monitor. The two dials on the monitor are both turned fully clockwise as the manual says.
Interestingly, pressing control+alt+del does seem to cause it to reboot.
Ideas please? Thanks in anticipation!
Need some advice. My Olivetti M24 has been connected to the mains power and it's monitor today for the first time in many years. Doing the testing, the machine is fitted with it's HDD controller card, but the cradle with the HDD and FDD are removed (and obiously disconnected).
When powered on the machine flashes it's keyboard LEDs for a few seconds and then beeps but produces no display at all. The monitor is the monochrome M24 monitor. The two dials on the monitor are both turned fully clockwise as the manual says.
Interestingly, pressing control+alt+del does seem to cause it to reboot.
Ideas please? Thanks in anticipation!