m_thompson's latest activity

The RICM has 6x Series/1 systems. We have never powered them up, and have only done a limited inventory. I don't think that we have any...

It was listed for Euro 99,- at ebay Germany. Missing some keys. Fixed it temporarily with VT100 keys in the top row and moving some to...

Nope. RM03 could run on a 15a 120 volt circuit. If you had two of them you could hook up the spindle delay line and run two on a 15a...

One S/N after mine!

About 3 hours, but I have a lot of practice soldering and used a really hot iron.

You can download and install the PiDP-10 software package on a Pi without the front panel. That will give you some time to learn about...

The quality of the PCBs, switches, and molded plastic parts were top notch. I had no trouble with soldering and fitting everything...

Very nice. I have all of Oscar's previous creations, but this looks the best so far. I am on Oscar's list for the next shipment - or at...

I'm champing at the bit for Oscar's next round of kit shipments. There should be one there with my name on it :)

I recently bought a PiDP-10 from Oscar Vermeulen at: https://obsolescence.wixsite.com/obsolescence/pidp10. He also makes replica...

Today, one week of holiday comes to an end. But it was great, today I finally got my PC04 running! I was able to load a RIM and a BIN...

From what Google finds an HSC70 will work with a KL10, but with a maximum of 24 disks.

Maybe RM05 disks?

A KL10-RA has Cluster-Interconnect. The Cluster controller and disks might have been reused with a VAX.

If you wanted to build up a UNIBUS PDP-11 from bits and pieces, one of the easier ways might be to put together an 11/84 system from...