Search results

Price is shipped to the US .... ps2xtSD ( includes cable, 32gb SD card ) - $100 ps2xtSD ( includes cable which uses pin adapter, 32gb SD card ) - $100 ps2xtSDminiPIA ( includes cable, 32gb SD card ) - $100 ( read notes down below! ) Sergey Kiselev 8bit ISA Network Card - $50 Lo-tech EMS...

What I'll do is just remove the video card all together and use the onboard video and then see how things react.

Ohh then I bet i know why then maybe. I've had a problem for a long time now, two different video cards but same chipset..., where they are both 1mb cards. But sometimes when system boots, it shows 256kb of memory. When it does this, I gotta power cycle the system a few times, and it then shows...

Well... I turned system on today. and EMS memory setting is gone again. I think i saw a message "memory change : reset the ram config" and now EMS was disabled again.

Did firmware update on my v1.11 board. Went fine! EMS settings are saving! I think some odd sounds I heard once in a while in Rail Road Tycoon are now gone with the adlib update? So far so good.

Above is all sold now.

I did get a USB OTG adapter for a USB mouse.... Using PMMOUSE it "works" .... sorta... I can move mouse cursor left and right. It detects left / right / middle wheel clicks... but it won't go up or down. Tried a few mice and same issue.

Yup. I have it reported on github. Right now using a 1000yr old 3 button serial mouse I found and using CTMouse for now with it.

I am on an IBM Model 30 / 8086. EMS on port 2A8 let me use the PMEMM.exe and to get 4mb to show up. Just did Device=C:\drivers\ltemm.exe I have not messed yet with anything UMB related. As haven't had a need yet... I did get an odd divide overflow error with PMMOUSE once or twice.... My...

Ah, I got mine from Texelec ( who i got picomem from ) so assume they must have did this already.

That seems correct. I got one if these and plopped it right on, turned the adlib support on and it worked without any hassle for myself. I too have the 1.11 board.

I created a number of issues on github for you to track. Other than some silly things to deal with, this thing is so cool otherwise! :)

Got some time tonight to play with the PicoMem board. 1) Small visual bug. Set IRQ to 10 for WIFI. Then set it to say.... 9. It will now show 90 on the screen. 2) Set the EMS Port to 2A8. Now the PMEMM.exe detected the EMS and 4mb of EMS memory showed up. 3) One time, with PMMOUSE.exe ...

I think another issue I am having is WIFI dropping / becoming unresponsive after some idle time has passed. Usually a few minutes if that... like.. i dunno... 5 ? Router sits right next to the system. And only this system is connected to it. I run a web server from the system. It works for...

Comparisons of storage speed tests I've done. Kind of interesting I think. PicoMem - Virtual HDD - 256mb Write Speed : 856.98 KB/s Read Speed : 1080.74 KB/s 8k Random, 70% read : 14.9 IOPS Sector random read : 18.7 IOPS --------------------------------- ISA>USB - CH375 / FreddyV Drivers ( 1gb...

Got my PicoMem v1.11 board today! IBM Model 30 - 8086 - 640k - NEC V30 8mhz CPU with math coprocessor. Installed, along with the Trident 1mb VGA card and CH375 card with FreddyV drivers. Card set to IRQ 3 1) Not 100% sure what I did, but my main disk drive got corrupted right away. I should...

I posted these on eBay ( ugh i know ) ... but if anyone wants to bypass them here, can go that route. Prices for item shipped in the United States .... I am probably off in prices in some case so I can haggle a bit if need be. TI-99/4A Plastic System in box @...

My PicoMem board will be here tomorrow! Eager to try it out in my IBM Model 30 with the NEC V30 8mhz. Got the Adlib add on also. Things of interest for me. 1) WIFI Internet vs hared wired car installed. 2) Adlib quality 3) EMS support vs LoTech 2mb card installed. I don't see this on the list...

Yah tried a bunch of drives here. Even old IDE drive from early 2000s. Knowing me... I probably never even tried to test the damn thing and tossed it in the binder. Or it being old and probably cheapo disc, starting to delaminate or something... who knows... but I gave up on it for now.

Gotta Share my $50 to them..... ill probably have to just live without it...