Search results

Friend, which system are you referring to? Pentium 60 or AMD Socket 7?

Hello, Recently I bought a ISA/PCI POST Debug Card from eBay. I need this card to fix my Pentium 60 MHz + Batman's Revenge Motherboard system. I tried to test the card with my AMD K6-2 500 MHz + Zida Tomato T530B-S Socket 7 Motherboard system. When I insert it in the PCI slot, the system ran...

SOME PROGRESS I have managed to source a replacement S82378ZB IC. My friend helped me to replace the IC. (In Hindi, regional language aimed for his students) Next problem is detected that the Intel N28F001 BIOS IC is totally blank! as mentioned here as 'Data Fade: Flash Data Retention Error'...

Thanks for the detailed suggestion.

A HELP ON BIOS Hello friends, I bought some BIOS ICs as backup to replace the original one if corrupted (pins are connected but rusted). But the BIOS dump from theretroweb.com is a .EXE file! Pls guide me how to burn the BIOS into the chip using my external programmer? P.S. I also bought...

This is my mod -

Fixed! Thanks to douglar and andrea for the guide.

Thank you for your suggestions. Yes, you are right about SB82378ZB. My laptop repair engg friend did it just to remove the rust/oxidation on the pins.

Hello, I just repaired my SS7 motherboard with SIS chipsets & AMD K6-2 500 MHz Processor. Replaced the BIOS IC (read-write error) and Clock IC (rusted pins) This is the motherboard - https://theretroweb.com/motherboards/s/zida-t530b-s I am using a CF-IDE Adapter (single type) with a 2 GB...

Friends, I am trying to revive my childhood Pentium 60 MHz + Batman's Revenge Motherboard + EDO RAMs. Issue: [00] POST CODE in both PCI and ISA Debug Cards. Steps already done: There was two tiny scratches on the back PCB. There was continuity BUT still jumper wire added for support (by...

Its Socket 4. Fixed using just a plastic pcs and super-glue.

Fixed the issue (y)

Friends, My Socket-A's Lever is not locking. Not exactly broken, just wear and tear thing..... Pls watch this video - Pls suggest any hack to fix this issue. Regards.

I am already using the latest 1.03 version.

Today, I managed to revive my old system gifted by my father. AMD K6-II 3DNow 500 MHz with Zida T530B-S Super Socket Motherboard. I need to replace the BIOS IC and the Clock IC. One small issue still exists. In this setup, 256 MB x3 RAMs are showing as 128 MB x3 RAMs! The eBay seller already...

very very happy to see this. me, not that lucky....

In my country, there is a Brand that sells ATX SMPS with -5v channel included.

Dear Ruud , one question- is this CGA card project supported? https://github.com/schlae/graphics-gremlin

may be it was a donor board.... God knows. Wish I can find a pic of the same motherboard to compare.... The only pic -

I did nothing.... just IPA cleaning....