• Please review our updated Terms and Rules here

Search results

  1. mloewen

    Holmes Engineering VID-80

    Does anyone have the CP/M software for the Holmes Engineering VID-80 board for the Model III?
  2. mloewen

    Kaypro 10 and Kayplus ROM

    In an old thread (https://www.vcfed.org/forum/forum/ge...0-rom-question), I talked about some problems I had trying to get a Kayplus ROM working in an older Kaypro 10 ('83). I finally got back into the system. The Kaypro 10 had the 81-180 mainboard and the 81-302-C ROM. I installed the Kayplus...
  3. mloewen

    6000HD floppy error

    I've looked through a bunch of 6000 and Xenix docs, and can't find this error. What does hard error BE10 indicate while trying to read a diskette? OS is Xenix 3.2. I suspect an alignment problem with this drive. It will format, read and write perfectly, but has problems reading disks written on...
  4. mloewen

    Zenith S100 board

    I have a Zenith 4-port serial board, which I believe might be a Z-204 Multiport Input/Output board for the Z100. Can anyone verify or otherwise identify it? http://q7.neurotica.com/Zenith_front.jpg
  5. mloewen

    Fulcrum Omniram 64K docs

    I have a Fulcrum Omniram 64K board which appears to be a newer revision than described by the available online docs (1.11 and 1.20). Does anyone have a manual for this revision? http://q7.neurotica.com/dscn7478.jpg
  6. mloewen

    4P CRT swap

    My 4P currently has the white CRT. Is it possible to simply swap out the white one for a green CRT, or does the green CRT require a different sweep PCB? Are the CRTs still available?
  7. mloewen

    Ansiterm

    Question for Ian Mavric or George Phillips... Are George's patches for ANSITERM necessary for the original Radio Shack 26-1126 HiRes graphics board, or just the Grafyx boards? Scrolling is terribly noisy on my RS board in the Model 4.
  8. mloewen

    What machine is this?

    Can anyone identify the desktop computer/terminal in these pictures? http://q7.neurotica.com/Oldtech/Scanners1.jpg http://q7.neurotica.com/Oldtech/Scanners2.jpg http://q7.neurotica.com/Oldtech/Scanners3.jpg These appear in the movie "Scanners", released in 1981. The filming itself took...
  9. mloewen

    Apple II Workstation Card, NIB

    http://www.ebay.com/itm/113328244116 Starting at $50.
  10. mloewen

    Wanted: HP 293X printer

    I'm looking for an HP printer, model 2934A, 2933A or 2932A. HP-IB interface preferred, but RS-232 is okay. PM if you have one available.
  11. mloewen

    Zorba Technical Reference Manual

    Does anyone have an original copy of the Zorba Technical Reference Manual? I'm specifically looking for the Ball BC monitor section. The schematics in the PDF version commonly available online are practically unreadable. I have the NOMIS 9 (IX) version, with the 9" screen on the right. The...
  12. mloewen

    Tandy case repair

    Which adhesive works well for repairing cracks in a Tandy 6000HD shell?
  13. mloewen

    HP 2108A key

    Does anyone have a key for an HP 2108A? This is an original 21MX M-series machine. The key is NOT the same as the E and F-series machines.
  14. mloewen

    Wanted: Keyboard for HP 264x terminl

    I need a working keyboard for an HP 264x series terminal. Let me know if you have a spare. I'm located in Central PA. http://q7.neurotica.com/Oldtech/
  15. mloewen

    Wanted: classic HP 3000 system

    In my continuing quest for classic HP 3000 hardware, I am looking for the following systems: HP 3000 Series 42 HP 3000 Series 37 HP 3000 Micro CX HP 3000 Micro XE If you have any of these systems available, or know someone who does, please let me know. Mike Loewen...
  16. mloewen

    Tandy 6000HD at VCFMW

    Pete asked to see pictures of large Tandy systems at VCFMW. Here's my Tandy 6000HD exhibit. The machine has the original internal and external 15MB drives, running Xenix 3.2. I was demonstrating the Micro Magic BBS that Jason Ward and I wrote in 1986, and ran for a couple of years in Sumner...
  17. mloewen

    Kaypro 10 ROM question

    I'm in the process of installing a KayPLUS ROM in a Kaypro 10, in preparation for installing a new (larger) hard drive. My K10 has a 81-180 series mainboard, but the sticker is missing from the factory ROM and I can't tell which one it is. It powers on to display version 1.9e. Assuming that...
  18. mloewen

    FreHD on Tandy 6000?

    Has anyone done any work on interfacing FreHD to a Tandy 6000? My two original 15MB drives are still working, but who knows how long that will last?
  19. mloewen

    Wanted: HP 3000 system

    I'm looking for a classic HP 3000 system, Series 42 or Series 37. Preferably within reasonable driving distance of central PA, but I'm flexible. Let me know if you have one, or a similar HP 3000. http://q7.neurotica.com/Oldtech/
  20. mloewen

    HP 3000 system wanted

    I worked on HP 3000 systems in the late '80s, and would like to find one. A series 42 would be nice, but a series 37 or microXE would do. I'm in central PA. I'm already aware of the series 42 on Ebay in Florida that's been sitting at $1,725 for the past year.
Top