• Please review our updated Terms and Rules here

Search results

  1. G

    Odd Commodore 64 design?

    I have one of those cases around here somewhere, still new in the box.
  2. G

    VESA VLB 1MB (exp to 2MB) S3 Video card and VESA VLB Multi I/O card

    Clearing out some of the clutter around the basement. $40 + shipping. http://www.ebay.com/itm/-/302011108960?ssPageName=STRK:MESE:IT Drivers and jumper settings available as a ZIP file if you have one of the same cards and need them. I didn't scan the video card manual, it's about 50 pages.
  3. G

    New Tandy 1000 RLX

    Picked this up a few weeks ago. 1000 RLX with original keyboard, mouse, printer and VGM 220. Plugged it in and bad things happened. High pitched squeal, smoke, burning plastic smell, the usual. I thought the power supply had died, but it was the monitor. Now I just need to change the battery and...
  4. G

    Seagate ST351A/X jumper settings

    I have a Seagate ST351A/X from a dead Tandy 1000 RLX. I want to put it in a P4 and see if it works and image it if it does. I can find a dozen versions of the jumper settings to put it in AT mode, but they all have options for "bus reset high" and "bus reset low". Any ideas on what this should...
  5. G

    Beige/gray/white full atx case

    Like this? A basic beige box. It's missing the one drive bay cover and has two drive rails.
  6. G

    New way to get DRM free games

    They only have six titles available now (three are STALKER games) but the way it works is that you put in the CD key from your boxed copy of the game and they will add the DRM free version to your games library and then you can download it. More titles coming soon. http://www.gog.com/reclaim
  7. G

    HP Vectra VE 6/350

    Other than a dead CMOS battery, it works. PII 350 384MB RAM C: 6GB D: 32GB Matrox MGA-G100 AGP ISA Sound Blaster 16 Plug n Play Win 98SE Office 97
  8. G

    HP Vectra VE 6/350

    Not vintage, but the local thrift store had it so I grabbed it. It's pretty clean, and looks like it's been upgraded with more RAM and a second hard drive. Haven't had a chance to plug it in and fire it up, should get to it this weekend.
  9. G

    AMD 5x86-133 + 3Dfx Voodoo 1 troubleshooting

    This may or may not help, depends on if you switched one S3 card for another S3 card. This is the back of my Diamond Monster 3D disk envelope. It was easier to scan it than retype it all.
  10. G

    Bought a SGI Indy today

    Just picked it up this afternoon. The seller has a few more Indys and at least one Indigo2. now I need to find a 13W3 adapter.
  11. G

    Trade creative sound blaster for RAM

    Will one 16MB work, or do you need a pair of 8MB? I have 9 72 pin 4X32 16MB 60NS EDO simms.
  12. G

    Cpu id

    Found a pair of odd ones while going through a box of random CPUs and heat sinks. Sorry about the bigger one, it seem permanently attached to the heat sink. Maybe somebody can recognize it by the pattern of the pins. I know the small one is DEC, but from what? The heat sink was actually bolted...
  13. G

    FS: Used AT tower case & power supply

    I took the bezel off to hopefully keep the Post Office from breaking it. $25 + shipping from 24571 area code. Box is 28lbs 4oz. 23"X17"X12". I don't have the missing drive bay covers.
  14. G

    FS: Used AT tower case & power supply

    Used AT tower case and 250W power supply. The corner of the bezel is chipped: And it doesn't have any feet, so the bottom is scuffed: It has a lock, but no keys.
  15. G

    FS: Apollo MVP3 motherboard, K62 /333 96MB RAM $40 + shipping

    Cleaning house again, decided to try here before Ebay. 2lbs, 11 oz, 12X10X7 from the 24571 zip code.
  16. G

    WTB: slot 1 motherboard

    Didn't think it was going to work at first. Turns out the previous owner had DIMMs in slots two and three but none in slot one. Doesn't work too well that way. :p
  17. G

    WTB: slot 1 motherboard

    A lot of 440BX boards would work. I have three, I think. I loose and two in complete PCs. If you want it let me know and I'll plug it up and see if it still works. Shouldn't take much time, the processor and ram are already on it.
  18. G

    Long slot covers

    Nope, those two are about an inch longer than they should be. I would think they came from the same case, two serial and one parallel, but it would be an oddball case. A normal cover isn't long enough for two 25 pin connectors, they usually have a long and a short, like a parallel and a game...
  19. G

    Long slot covers

    I found these going through a bag of slot covers and connectors. I knew that a lot of the early AT cards were too tall to fit into an XT case, but I thought that the slots themselves were the same heights. Did I miss something during the 286 era?
  20. G

    486 Motherboard with PS2 connector - is it possible to get bracket for it?

    I have one that is 1x6 and a couple that are 2x4. Would you like it plain, or with a serial or parallel port? Here's a picture of how the connector is wired, if you would rather modify one than pay shipping.