• Please review our updated Terms and Rules here

Search results

  1. Magnedyne

    Western Europe Burroughs BX-1000 Beam-X vacuum switching tube

    Hello, I recently picked up a Reuters stockmaster which was badly damaged in shipping. Amongst the casualties is a BX 2013 tube. I'm hoping I can substitute yours for it but at 10€ I'm willing to take that risk. Looking forward to hearing back from you.
  2. Magnedyne

    ADM-3a Digital Engineering RG512 Vector Graphics Board

    I haven't got one either although I should really get one as well.
  3. Magnedyne

    ADM-3a Digital Engineering RG512 Vector Graphics Board

    Alright that seems good news so far. Shame I haven't got an ADM-3a Board, only ADM-3. I'll have to make some modifications to the wiring, but it might just work.
  4. Magnedyne

    SCAMP 50th anniversary year (1973-2023) and some IBM 5100 notes

    Ah, the IBM SCAMP, i see. The SC/MP was often pronounced Scamp thats what had me confused. I was a bit surprised to “learn” that the sc/mp came out in 73, which it obviously didn’t. But yes, I will share them.
  5. Magnedyne

    SCAMP 50th anniversary year (1973-2023) and some IBM 5100 notes

    i recently got an unbuilt SC/MP Introkit. I’m planning on having a reproduction board made in order to build one. Obviously I’m keeping this one unbuilt.
  6. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    I’m aware of this regarding the EPROMs, however, this is such a special machine id like to have full functionality even if I’m not going to use it. Regarding dumping my 1.0 Roms, is there any Eprom Programmer/Reader you recommend? 1500$, that’s insane. I was aware of the historical significance...
  7. Magnedyne

    Intel Intellec 8 development system key missing

    Thank you! I’ll find myself a locksmith who can fabricate a replica.
  8. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    The 5V PSU is easy to replace luckily. The +80/50AC/… is a bit more complicated but should be doable as well if it turns out to be beyond saving, I doubt this however. Anything can be fixed with enough effort.
  9. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Ah, hadn’t seen your edit.
  10. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Makes sense, input would be 110V in that case. I haven’t got the unit in front of me right now, I’m at school, so I could only take a guess. But yeah that would make more sense. I haven’t been able to remove the PSU yet so I couldn’t check it directly with a Voltmeter. I’ll need a longer and...
  11. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Does your unit run on 50Hz? The description of the power supply suggests to me that this should be possible, however I’m not sure.
  12. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Alright I have studied the schematics a bit more and most of my questions have been answered. (Regarding the 12V they are there on paper but since they’re not required by anything they don’t seem to exist in reality. My theory of the unit having been partially converted to 240 also turned out to...
  13. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    The other psu, as mentioned previously, I’m not sure if mine has been converted to 240V. If it’s not too complicated, could you please provide me with pictures of the other psu as well? Taking a look at the schematic for the Backplane it states that +/-12 are connected to the Molex connector on...
  14. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Thank you very mutch, should be really easy to replace.
  15. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    The psu pictured is the one also responsible for 5v right? which connectors and voltages does it have/ output where? regarding the Roms, I unfortunately havent got a compatible eprom reader. I own a Facit reader and punch as well, I’ll attach some pictures here later.
  16. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Nixdorf 8870 and the Alpha Micro.
  17. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    It cleaned up really well, was just a bit dusty after all. I’ll most likely pair it with my ADM-3 even though they’re 2 years apart. Looks good imo. If I manage to get an ASR one day it’ll most likely go with the intellec.
  18. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Another thing I should mention is the Serial Number, 00073, so still relatively early. Rev A. Is also written all over the place.
  19. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    As I mentioned previously, one of my power supply’s is missing. The other one might just have been converted to 240V already. There is another power supply electrically „in font“ of the original transformers, however I haven’t figured out what it does yet.
  20. Magnedyne

    30€ Intel Intellec MCS 8 8080 restoration

    Here are some pictures of all the Cards. I’ve got one Rom card, two RAM cards, a CPU card, an interface card, an Eprom programmer card and the front panel controller.
Top