Search results

This site holds a wealth of information also. Its a mission to navigate but if you do find things... http://ps-2.kev009.com/eprmhtml/eprm0/f2048.htm

IBM AUTO 16/4 Token Ring Adapter 16bit drivers are here: https://archive.org/details/img-2974_202402

I managed to resolve my issues with the binding. The short answer was the protocol.ini file. The long answer is for anyone that want to avoid these gotya's. The cards I was testing where the; IBM 16/4 Token Ring Adapter 8bit IBM 16/4 Token Ring Adapter 16bit and the IBM AUTO 16/4 Token Ring...

So I've sourced a NOS IBM Auto 16/4 Token Ring ISA card now. Does anyone know how to force the lanaid.exe into CGA mode? It seems to detect my EGA card and force it into a resolution my IBM 5153 colour monitor can't reach. I don't see any switches listed in the documentation.

What do you think of the ISA AUTO 16/4 92G7632 adapter? Think it will work ? I've found a good price on one.

My ISA card has got 02G1394 on the metal protector.

Hi, Did you manage to get your lab setup? I'll try and pop the lid on my AT to get the pinegrove number to confirm which one I have. With the "auto" adapter can you choose the IRQ. The reason I'm using the one with dip switches as I have a conflict with my sound blaster and need to be able to...

@ibmmuseum Do you have a card like mine you could try and see if you can get netbind working under MSDOS? I'm stuck I think. I've tried everything. Not sure why I can't bind. mTCP works but not Ms Networking Client 3.0.

Hi guys. I'm back on this project. I recently acquired an AS/400 mid-range and was trying to get my head around all the tech and OS400. A mission. lol . So I was looking at the power supply and nothing visual seems damaged. So I checked fuse, all good, I checked out output voltages and bad...

So my issue now is with the MSDOS Network Client. I can't seem to get netbind.com binding. The NDIS driver is now loading and there are no conflicts. The card is detected in MSDOS. Any ideas? I get the following error when running c:\NET\net start netbind Error: 5955: The protocol manager was...

Hi, the ASIC on my 8bit card is: 02F8442ESD ( IBM 14 PO) (189470221S) which is etched onto the aluminum cover :)

Here is the 8bit card I use. I use one on y IBM XT 5160. I'll attach the config and files. the reason for using the 16bit manual jumper one in my IBM 5170 is to have more options with IRQ settings as I use a soundblaster 2 and Roland MT32. Can you check if you have the DXME0MOD.SYS file on your...

ok thanks for the info. My 8bit is the IBM Token ring 16/4 adapter. Could you put the files online somewhere so I can grab a copy? Thanks, Rob

Interesting. The two ROMS on the card read: 03F0227 and 03F0293 .Does this help?

Exactly. It does not make sense the RT301 would blow something on the PSU. I definitely did not touch metal with screwdriver. I used a plastic one as I was worried of getting electrocuted. haha I will open the psu this weekend and try to find the fault. Right now I’ve got no power when...

Thanks for the replies. I'll gather the info as I need to open the PSU again and see what is actually "fired" I had it in a shop that in the end fixed the PSU but did what I did to adjust the vertical sync then it blew the PSU again and they gave up. I did a complete recap myself. I took time...

I'm effectively trying to load either MTCP with the IBM-token ring packet driver or Microsoft Network client 3.0. Seems the BM ISA 16 BIT 16/4 Token Ring Adapter II uses three main files: One the IBM16TR.DOS is a NDIS driver that comes on the IBM Token-Ring Network 16/4 Adapter II Diagnostic...

Thanks. No oscilloscope. I’ll take a look at the TDA2653A. Any ideas what could be causing the power supply to blow when moving the vertical frequency dial?

Hi guys, Has anyone setup the IBM ISA 16 BIT 16/4 Token Ring Adapter under MSDOS? I'm trying to use the IBM local area network support program 1.1 (DXMA0MOD.SYS and DXMC0MOD.SYS in my config.sys) which I used with my 8bit ISA Token Ring network adapter but its not detecting the card. Do I need...

Hi, I've managed to acquire an AS/400e type 9406 F2. Sticker on the back shows the OS400 is V4R3. The hard disks were removed from the bays but are included in a separate cardboard box. In order to try and maintain the data that was on those drives does each drive need to go back in the slot it...