Search results

Hi, attached data sheet, cheers

What PC are you running your HL5040 on And OS

Thanks for the info Chuck going to see if I can get disks with 98se to install then hopefully run a laser printer through USB 2 card ports and or parallel, I have two USB 1.1 ports installed but they are no use at all, maybe for a mouse

Hi Chuck, it is a deskjet 3733 USB connector and it has drivers for xp and 98 on CD can't use it, so looking for a retro parallel that can run in 95, no joy so far. Thought about a USB 2 card to fit in a slot but no guarantee it will work. Then there is a chance that a new installation of win...

Nice and working

I am looking on line for a parallel printer that comes with win 95 drivers. Apparently HP do not have 95 drivers. I want a printer that I can be sure will run on the Aptiva with win 95 without having to mess too much with stuff. Any advice out there chap's?

I do not have access to the IBM or printers at the moment as they are with "she who must be obeyed" so I will have to message her to check the version of 95. however she has sent pics of the printers ,

both the printers use USB so I will look for a USB card, I am running win 95 and considering installing win 98,

Hi, when you say a USB card can you explain further please... :unsure:

I have received an Atari 520 ST in damaged condition so do not whish to try and repair it, where are you located it may be possible to send to you. if its of interest it is free. I can post pics of the damage if interest is there...:)

This is interesting as I know nothing about the MX-80. I was given the printer by a friend who found it in his attic with an ATARI 520ST(FM) / ATARI SM124. I have attached pictures of the MX-80...I still have to test it....

Thanks I will clean it up and see if it starts

I have an Epson MX 80 Parallel Printer, (Not yet Tested) if in working condition will it run on an IBM 2137-E74 PC ?

is it possible to connect and run either an HP desk jet 3733 or an IBM Lexmark 4126-006 to the 2137-E74 PC ?

not had it switched on yet as it is with my good lady, so not heard it run, was the CPU fan faulty and needed replacement or did you replace with a different model?

this is the seller info.... "It's a 1997 PC with Monitor from 1998, so >24 years old (nearly quarter of a century)! Keyboard in very good condition, Mouse is new (Aopen brand). Monitor is very good condition, only the odd scuff. All devices same white shade and not much discolouration which is...

No problem, Surface scan will change the infill to 100% :) excellent chap's and no extra charge...(y)

Yes, I was unsure, I will contact Surfacescan and discuss a possible change to 100% as yours looks really good (y)

I have Acquired an IBM Aptiva 2137-E74 PC Complete Setup & Monitor 1997/8 any advice on this model would be appreciated.