clh333
Veteran Member
Just received an Amiga 2000. Have no experience with this model but upon brief inspection I believe this is a model C board, revision 6.2. The seller said it would boot; I haven't tried that yet, because it is clear some things are TBD.
Referring to the attached pictures:
Pic 1,3: There is a superstructure above the motherboard that houses the power supply, fan and drive bays. Some of the screws are missing. Assuming all of the screws are removed can this be then lifted up and off the board to reveal the board?
Pic 2: There is some evidence of corrosion, as if the unit was stored in a damp environment, but the traces appear good except for some dust on the board. The seller says he removed the battery. Where is the battery housed?
Pic 4: There are two cards in slots. One is marked Hard disk controller and the other appears to be a memory expansion. The Quantum ProDrive is not hooked up to the HDC, nor is the Chinon floppy. An extra Chinon FD came with the deal, as did keyboard and mouse. I already have a monitor.
Anyone with experience in these machines please feel free to chime in.
Thanks for your advice.
-CH-
Referring to the attached pictures:
Pic 1,3: There is a superstructure above the motherboard that houses the power supply, fan and drive bays. Some of the screws are missing. Assuming all of the screws are removed can this be then lifted up and off the board to reveal the board?
Pic 2: There is some evidence of corrosion, as if the unit was stored in a damp environment, but the traces appear good except for some dust on the board. The seller says he removed the battery. Where is the battery housed?
Pic 4: There are two cards in slots. One is marked Hard disk controller and the other appears to be a memory expansion. The Quantum ProDrive is not hooked up to the HDC, nor is the Chinon floppy. An extra Chinon FD came with the deal, as did keyboard and mouse. I already have a monitor.
Anyone with experience in these machines please feel free to chime in.
Thanks for your advice.
-CH-