Compgeke
Veteran Member
I have way too much stuff and it's time to start downsizing. Feel free to make an offer on anything, nothing bad can come of it.
AST Premium 286 Note: This here's local pickup only in Fairfield, California. Asking $200 but if you want to make an offer go for it.
8 MHz Intel 286 (actually might be 10)
1 MB RAM on an AST FastRam
Hercules Graphics Plus
Soundblaster 16
Intel ISA Ethernet
Logitech Bus Mouse Card
1.2 MB 5.25" Floppy
70 MB (iirc) Seagate Hard Drive and Western Digital controller
Also includes the AST-branded keys, an amber 12" monochrome monitor (casper brand) and the mouse. If needed I can dig up a keyboard but the original was foam and foil and had some dead keys.
Pictures: http://imgur.com/a/W5dxp
Now, for stuff I will ship
Micronics D5CUB Asking $30/ea.
I have two of these boards, both with 75 MHz Pentiums but no ram.
Pictures: http://imgur.com/a/ahOny
Deico 386NSX Asking $40/ea
I think I have two of these as well, I'll have to check tomorrow.
25 MHz 386SX, no ram. No battery damage either, and the original has been removed.
Pictures: http://imgur.com/a/fM8uv
Update 1:
Moar stuff!
PC Chips Socket 3 Motherboard $25
Luckily\unluckily it's not a fake cache board, the cache seems to really be real. Has 256 KB cache, 30 pin and 72 pin simm slots and 3 VLB slots. Rather than a 3.6V barrel or 4.5V brick or Dallas brick this uses a CT2032 making replacements far easier.
Pictures: http://imgur.com/a/923Ng
Edom MV035 Socket 3 Motherboard $30
Has no cache but it's a fairly late model 486 board - the BIOS chip has a '97 copyright on it. Kind of cool as well it has the MV035 actually written on the board, something uncommon in pre-Pentium days. It does have 1 meg of 30 pin simms I'll leave on it.
Pictures: http://imgur.com/a/NRP2q
Twinhead International CT-6040S $15
I'm assuming this is an MDA\Printer card but there's not a lot of information on it. I haven't tested this but if there's any interest I'll lug out an MDA monitor and find out.
Picture: http://i.imgur.com/53jn1Iv.jpg
Adaptec AHA-1542CF $10
Works fine, floppy and SCSI.
Picture: http://i.imgur.com/D2x6YIC.jpg
Sound Blaster 16 CT1740 $20
Looks fine but I haven't tested it in a couple years. If there's interest I'll shove it in something and test.
Picture: http://i.imgur.com/jxN0kbB.jpg
Regarding shipping: anything other than the AST setup I'm willing to ship. From past experiences a motherboard costs around $12-$13 to ship within the US and varies on expansion cards, depending on whether they'll fit into flatrate packaging or not. I'll calculate out roughly what it costs if you send me a PM with a zip code.
AST Premium 286 Note: This here's local pickup only in Fairfield, California. Asking $200 but if you want to make an offer go for it.
8 MHz Intel 286 (actually might be 10)
1 MB RAM on an AST FastRam
Hercules Graphics Plus
Soundblaster 16
Intel ISA Ethernet
Logitech Bus Mouse Card
1.2 MB 5.25" Floppy
70 MB (iirc) Seagate Hard Drive and Western Digital controller
Also includes the AST-branded keys, an amber 12" monochrome monitor (casper brand) and the mouse. If needed I can dig up a keyboard but the original was foam and foil and had some dead keys.
Pictures: http://imgur.com/a/W5dxp
Now, for stuff I will ship
Micronics D5CUB Asking $30/ea.
I have two of these boards, both with 75 MHz Pentiums but no ram.
Pictures: http://imgur.com/a/ahOny
Deico 386NSX Asking $40/ea
I think I have two of these as well, I'll have to check tomorrow.
25 MHz 386SX, no ram. No battery damage either, and the original has been removed.
Pictures: http://imgur.com/a/fM8uv
Update 1:
Moar stuff!
PC Chips Socket 3 Motherboard $25
Luckily\unluckily it's not a fake cache board, the cache seems to really be real. Has 256 KB cache, 30 pin and 72 pin simm slots and 3 VLB slots. Rather than a 3.6V barrel or 4.5V brick or Dallas brick this uses a CT2032 making replacements far easier.
Pictures: http://imgur.com/a/923Ng
Edom MV035 Socket 3 Motherboard $30
Has no cache but it's a fairly late model 486 board - the BIOS chip has a '97 copyright on it. Kind of cool as well it has the MV035 actually written on the board, something uncommon in pre-Pentium days. It does have 1 meg of 30 pin simms I'll leave on it.
Pictures: http://imgur.com/a/NRP2q
Twinhead International CT-6040S $15
I'm assuming this is an MDA\Printer card but there's not a lot of information on it. I haven't tested this but if there's any interest I'll lug out an MDA monitor and find out.
Picture: http://i.imgur.com/53jn1Iv.jpg
Adaptec AHA-1542CF $10
Works fine, floppy and SCSI.
Picture: http://i.imgur.com/D2x6YIC.jpg
Sound Blaster 16 CT1740 $20
Looks fine but I haven't tested it in a couple years. If there's interest I'll shove it in something and test.
Picture: http://i.imgur.com/jxN0kbB.jpg
Regarding shipping: anything other than the AST setup I'm willing to ship. From past experiences a motherboard costs around $12-$13 to ship within the US and varies on expansion cards, depending on whether they'll fit into flatrate packaging or not. I'll calculate out roughly what it costs if you send me a PM with a zip code.
Last edited: