daver2
10k Member
Yep, photograph and get to the memory test.
Not sure about the 05 for the keyboard display - but the PIA is not in yet...
Dave
Not sure about the 05 for the keyboard display - but the PIA is not in yet...
Dave
Anyway... concerning Configuration HOTEL. Please take a photo of all the ROM slots.... I would like to see what we have!
Also. please confirm this is 000039DB ROM ( actually I see DD67... and UD9.bin shows F=DD67 )
Let the count go to zero.... and see what happens...
INDIGO config:For Configuration INDIGO
I would like you to replace all the original ROMs into their correct locations, except UD9 which should stay as 000039DB ROM. Put the original UD9 ROM into socket UD5 (I presume that is empty)
Take a photo of all the ROMs and the count down page
Unfortunately i don't have ud9 bodge because i finished my 2532 eprom..i have some 2732 but.......Very good.. since @daver2 is out I will pre-empt him...
Now for Configuration JINX
Replace UD9 with a ROM containing UD9_bodge.bin (post 374) this should have a checksum 0005BA4E
Then show the photo again... some checksums should change
Why?I believe you still need to replace your editor ROM and/or the editor ROM socket has not been shown to work... you have a few issues to go...
Why not? Wasn't it shown earlier that your Edit ROM couldn't be read?Why?
Why do you think it doesn't work edit rom?Why not?
The checksum is shown in the INDIGO screenshot. That's the wrong number. In fact the checksum displayed is the same as in HOTEL when the edit ROM wasn't even in place. EIther the ROM is dead, or the UD8 socket is dead or both.Why do you think it doesn't work edit rom?
Ok Nivag now i understand!The checksum is shown in the INDIGO screenshot. That's the wrong number. In fact the checksum displayed is the same as in HOTEL when the edit ROM wasn't even in place. EIther the ROM is dead, or the UD8 socket is dead or both.