Do you have any of the PM4xx Personality Modules for the Tek 1230 logic analyzer?

[circa77]

If so, please get in touch. There are a bunch of them (for different CPUs & buses - about a dozen, mostly 8-bitters, but some 16),
and we so far have the PM403 (6502) and PM407 (6800), reverse-engineered them, and have determined that one can be turned
into the other with an EPROM swap and change of a couple of jumpers. We're also working on the PM406 for the 6809.

But that's all we have. We would very much like to get access to as many of the others as possible, starting with the PM402 (Z80).
These are hard to find, so we're casting nets everywhere to see if anyone has or knows where any can be found. We'll buy, borrow,
or work with the owner on the reverse-engineering if buddy doesn't want to let it out of buddy's sight.

 

[inotarobot]

If so, please get in touch. There are a bunch of them (for different CPUs & buses - about a dozen, mostly 8-bitters, but some 16),
and we so far have the PM403 (6502) and PM407 (6800), reverse-engineered them, and have determined that one can be turned
into the other with an EPROM swap and change of a couple of jumpers. We're also working on the PM406 for the 6809.

But that's all we have. We would very much like to get access to as many of the others as possible, starting with the PM402 (Z80).
These are hard to find, so we're casting nets everywhere to see if anyone has or knows where any can be found. We'll buy, borrow,
or work with the owner on the reverse-engineering if buddy doesn't want to let it out of buddy's sight.

Its around 2 years on since you posted this. Did you have any success ?

I have a few Tek 3000's Prism Logic Anal's in my workshop. I think at some point in some bits I bought from USA there was some TEK 1230 bits ? I will need to look during my clean up

Will let you know within a month