KLund1
Veteran Member
I have a particular system that will boot perfectly with a Epson SD-521. But I get nothing with a Teac FD-55BV.
When first powered the Teac will spin a second, and move the head back to zero. but nothing else. But this is normal at power up for almost any drive.
I have moved the DS jumper from O to 1, nothing. I have used both straight through and twisted ends of the known good ribbon cable, No change.
The Epson is set to 0 and has no other jumpers.
The Teac has lots of jumpers so I think it just a matter of where to put jumpers, but I have no idea which ones. This particular Teac is a 06-U sub version. I also have a Teac 55BR 102-V, and 55GRF 159-US.
I can find the Teac jumper settings wedbite pages, But I do not understand the particular vocab and abbreviations.
Any suggestions out there?
Thansk
When first powered the Teac will spin a second, and move the head back to zero. but nothing else. But this is normal at power up for almost any drive.
I have moved the DS jumper from O to 1, nothing. I have used both straight through and twisted ends of the known good ribbon cable, No change.
The Epson is set to 0 and has no other jumpers.
The Teac has lots of jumpers so I think it just a matter of where to put jumpers, but I have no idea which ones. This particular Teac is a 06-U sub version. I also have a Teac 55BR 102-V, and 55GRF 159-US.
I can find the Teac jumper settings wedbite pages, But I do not understand the particular vocab and abbreviations.
Any suggestions out there?
Thansk