eestes3
Member
Rescued a SMS 1000 system. Trying to get it up and running. Has an M8186 processor, a 256KB Camintonn memory card and a Camintonn DLV11-J clone. With a terminal connected to the serial card I get into the processor ODT just fine. However I cant get into the SMS foundation card serial port. The cab kit is missing for the 2 foundation serial ports. The 20 pin ribbon cable from the backplane is there, but no bulkhead mount for the 2 RS232 ports.
Does anyone know what the pinout spec is for the foundation serial port cable? It is not noted in the manual on bitsavers. I can get through the sense menus from the operator panel, but via serial is really needed I think. Any insight on this would be greatly appreciated. Thanks.
Does anyone know what the pinout spec is for the foundation serial port cable? It is not noted in the manual on bitsavers. I can get through the sense menus from the operator panel, but via serial is really needed I think. Any insight on this would be greatly appreciated. Thanks.