zombienerd
Veteran Member
Does anyone have a P70 that would be willing to disconnect the plasma power connector (6 pin) and take voltage readings? You have to cut a few zip ties and slide some heatshrink out of the way.
I can't find a reference anywhere for the plasma voltages. I have a "pinout" with colors listed (which are Red, Yellow, Black, White, Blue) - but no voltages listed! Gut is telling me somewhere between 100v and 600v DC, so please, if you attempt this, take proper safety precautions!
My P70 has a dead PSU, no schematics are available, and I can't find the culprit for the life of me, so I'm considering replacing the internals with a Meanwell supply (125W 5/12/-12), and custom design a buckboost or find another secondary psu that can do the voltages the plasma needs, but I need to know the required voltages.
Thanks!
Adam
(YesterGearPC)
I can't find a reference anywhere for the plasma voltages. I have a "pinout" with colors listed (which are Red, Yellow, Black, White, Blue) - but no voltages listed! Gut is telling me somewhere between 100v and 600v DC, so please, if you attempt this, take proper safety precautions!
My P70 has a dead PSU, no schematics are available, and I can't find the culprit for the life of me, so I'm considering replacing the internals with a Meanwell supply (125W 5/12/-12), and custom design a buckboost or find another secondary psu that can do the voltages the plasma needs, but I need to know the required voltages.
Thanks!
Adam
(YesterGearPC)