imaging a whole hard disk into a file

[Al Kossow]

A little convoluted, but i was able to dump it
The thin client wouldn't recognize anything plugged into the mainboard IDE connector so I used an AT IDE ISA card
then DMDE to dump the DoC.

Thanks again for pointing me at DMDE!

 

[Trixter]

I always use a rather simple (but still GUI-driven) tool called "Partition Image" to do that in DOS. But there are plenty of options, as that's really not a hard task to do.

Do you have a link to this? I'm curious to check it out.

 

[g4ugm]

A little convoluted, but i was able to dump it
The thin client wouldn't recognize anything plugged into the mainboard IDE connector so I used an AT IDE ISA card
then DMDE to dump the DoC.

Thanks again for pointing me at DMDE!

That sounds a nice tool. I have made a note of it too.