I have a couple of 164550 (4x) external parallel port CD-ROM drives made by Microsolutions. These both work fine on my Monotech NuXT V2.0 motherboard ( https://monotech.fwscart.com/NuXT_v...K_XT-IDE_Multi-IO_SVGA/p6083514_19777986.aspx ). However, on my clone 8MHz Magitronic XT after the CDROM driver loads (BPCDDRV.SYS) I completely lose the keyboard?
Has anyone else run into this issue? The driver states it has found the drive and MSCDEX gives it a drive letter of D:.
Nothing out of the ordinary in the XT clone. Oak VGA card, Media Vision Thunderboard sound card, Monotech floppy controller with 9pin COM port, Lo-Tech XTIDE controller, and a standard 8bit parallel port card. The system has 640K and running DOS 6.22.
XTIDE; D800
Floppy: CE00
Sound: 220, IRQ 5, DMA 1
LPT1: IRQ7, 378
COM1: IRQ4, 3F8
Has anyone else run into this issue? The driver states it has found the drive and MSCDEX gives it a drive letter of D:.
Nothing out of the ordinary in the XT clone. Oak VGA card, Media Vision Thunderboard sound card, Monotech floppy controller with 9pin COM port, Lo-Tech XTIDE controller, and a standard 8bit parallel port card. The system has 640K and running DOS 6.22.
XTIDE; D800
Floppy: CE00
Sound: 220, IRQ 5, DMA 1
LPT1: IRQ7, 378
COM1: IRQ4, 3F8