• Please review our updated Terms and Rules here

Need help baffled by FreHD setup under LDOS 5.3.1

Chromedome45

Veteran Member
Joined
Jul 6, 2009
Messages
3,993
Location
Central Florida
I am trying to setup the FreHD on my Model 4 in Model III mode. I issue the command SYSTEM (DRIVE=2, DRIVER="RSHARD5") and get an error that basically says
to issue the command exactly as I did. Confused. The FreHD is turned on etc. I have done this before many years ago. But now I can't seem to get it working.
Have also tried SYSTEM (DRIVE=2,DISABLE,DRIVER="RSHARD5") and that didn't help either. Any help appreciated.100_2621.JPG
 
Last edited:
To rule out a possibly defective RSHARD5/DCT file: does it work in an TRS-80 emulator?
 
Back
Top