I am clearing out some of the stuff I am not using in order to gather up money to buy a 3d printer (yay). I like these items, but my use of them has gone from rare to not at all, so its time for them to find good homes so they they rot out in the garage.
Before I show the goods, here is the ground rules
I will be posting this identical thread on atariage.com and vcfed.org under the same username, and I get PM's on both sites just fine
Payment though Paypal, and payment in full
United States Please
First up is a Mirror brand SCSI hard drive enclosure, there is no hard disk, that went inside one my long gone mac's. The sheetmetal inside has mounting positions for 3.5 and 5.25 inch drives, along with a cutout for a 5.25 inch drive. The plastic is not cut out for the 5.25 inch drive but if your brave you could make it work with a CD ROM. Has 2 outlets on the back which are switched. Footprint fits under a old style all in one black n white mac.
10$ + postage
Next up is a beat to all snot Pentium Laptop. 90Mhz cpu, 8 megs ram, 500 meg hard disk, 640x480 DSTN 16 bit color VGA display (800x600 24 bit on external monitor), ESS audio drive, power supply, broken floppy disk. Missing hard disk caddy but disk plugs in to machine direct without adapters, needs some new caps, I started to replace them but did not have 25 volt 100uf smt caps. Onboard audio is highly distorted, external audio seems fine. Windows 95b installed with all drivers installed.
10$ + postage
Finally is a very nice Pentium Laptop, 150Mhz MMX, 80 megs of ram (16 onboard 64 in the slot), 800x600 12 inch color TFT display, ESS audio drive, power supply, Cardbus USB 2.0 card, Cardbus 10/100 network card, Cardbus 802.11b wifi card, USB DVD writer, working external floppy drive. Currently has a 4 gig hard drive, bios will not see greater than 8 gigs and actually work! Windows 98 Second Edition with all drivers installed.
75$ + postage
Thanks for looking and if you have any questions feel free to post them!
Before I show the goods, here is the ground rules
I will be posting this identical thread on atariage.com and vcfed.org under the same username, and I get PM's on both sites just fine
Payment though Paypal, and payment in full
United States Please
First up is a Mirror brand SCSI hard drive enclosure, there is no hard disk, that went inside one my long gone mac's. The sheetmetal inside has mounting positions for 3.5 and 5.25 inch drives, along with a cutout for a 5.25 inch drive. The plastic is not cut out for the 5.25 inch drive but if your brave you could make it work with a CD ROM. Has 2 outlets on the back which are switched. Footprint fits under a old style all in one black n white mac.
10$ + postage
Next up is a beat to all snot Pentium Laptop. 90Mhz cpu, 8 megs ram, 500 meg hard disk, 640x480 DSTN 16 bit color VGA display (800x600 24 bit on external monitor), ESS audio drive, power supply, broken floppy disk. Missing hard disk caddy but disk plugs in to machine direct without adapters, needs some new caps, I started to replace them but did not have 25 volt 100uf smt caps. Onboard audio is highly distorted, external audio seems fine. Windows 95b installed with all drivers installed.
10$ + postage
Finally is a very nice Pentium Laptop, 150Mhz MMX, 80 megs of ram (16 onboard 64 in the slot), 800x600 12 inch color TFT display, ESS audio drive, power supply, Cardbus USB 2.0 card, Cardbus 10/100 network card, Cardbus 802.11b wifi card, USB DVD writer, working external floppy drive. Currently has a 4 gig hard drive, bios will not see greater than 8 gigs and actually work! Windows 98 Second Edition with all drivers installed.
75$ + postage
Thanks for looking and if you have any questions feel free to post them!