Ed Groenenberg
Experienced Member
I have decided to let go of most of my PDP-11 collection and to keep only one machine.
Cards/boards
Count Board Description
1 H217c 16x x 18 core plane
1 H222A/G652 combo card with 16k x 16/18 bit core plane
2 H3190 test card
1 M920 Unibus jumper
2 M930 Unibus terminator (short version)
2 M981 Unibus jumper
6 M7273 Grant card wit BR & NPG (green handle)
6 M7454 TU80 interface
1 M7518-YM DECQA
4 M7521 DELUA
2 M7546 TK50 interface
2 M7728 RX02 internal controller - B
3 M7744 RX02 internal controller - A
4 M7762 RL11
2 M7810 PC11 (PC05 interface)
14 M7821 Interrupt control
11 M7856 DL11-W (single line SLU, with LTC)
7 M7859 KY11-B (11/34 programmer console interface)
4 M7860 DR11-C
1 M7865 Unibus 2 word out
2 M7891 256Kb memory (12/15 volt selectable)
1 M7946 RXV11 (QBus RX01 interface)
2 M8192 KDJ11-A
2 M8256 RX211 (RX02 interface)
8 M8265 KD11E-A 11/34a Datapath
7 M8266 KD11E-A 11/34a Control
2 M8267 FPU-11 11/34a floating point option with jumper block
1 M8291 CR11/CM11 (card reader interface)
10 M8722 256Kb memory (12 volt)
1 M9200 Unibus jumper
2 M9202 Unibus jumber
2 M9302 Terminator card
7 M9312 Bootsrap & terminator card
1 W130B For Unibus microstep debugging
2 W9512 Wirewrap board, one is unuased, the ather is populated
1 - Unibus/Qbus 2 slot extender card
1 - Unibus/Qbus 4 slot extender card
3 - Unibus cable board for use with 4 standard flat cables (2 needed per backplane to backplane connection)
1 UC17 Emulex single channel Unibus SCSI
1 - 4Mb Qbus memory card, memory chips are socketed.
Large controllers
1 TC11 TU56 controller, has the G888 cards & data cable (red coax), comes with 2 paddle boards for making own control cable.
5 RK611 Complete cardset (5 cards/set)
1 RK611 Backplane for the controller
Other devices
1 - Box of misc M9312 boot proms (device & basic)
2 - 11/34 console with programmer keypad
3 - Ethernet bulkhead (DELUA/DEQNA/DECQA/DEUNA)
1 LA12 Correspondent terminal with manuals & extra ribbon
1 - Unibus voltage margin test kit in suitcase
1 PMK05 Unibus signals display box in suitcase
4 - cover panels / blind panels (plastic/old style) 10" high
4 - idem, half height
1 LA180 Decwriter I with spare internal boards, PSU) Has ther serial interface option.
1 RK07 Drive with extra spare parts, exta internal controller boards, 4 (maybe 5) disc packs, 1x alignment pack
1x RK07 cable to controller, 1x extra HEPA filter (used, but looks clean)
Has it's own corporate cabinet housing with front & backdoor.
1 RX02 Dual drive floppy unit
9 - Boxes with RX02 floppies
1 RL02 Drive with set of slides
1 RL02 drive slides only
1 TU80 (complete, vertical mount, 2 extra internal controller board sets, extra HEPA filter, 2x heads, misc spares etc, extra PSU, cable set.
Comes with 10 - 15 9track tapes.
1 H960 Cabinet with masthead, no side panels
Matching documentation for the cards and devices like Field service
diagrams, User Manuals, Maintenance manual etc. come with it.
Miscellaneous other loose bits & bobs, basically all parts I do not need.
Please note that all of this is in The Netherlands and shipping will be $50 and higher.
I prefer to sell the whole as a lot and open for a reasonable offer, but will also consider smaller lots.
Will add pictures very soon.
Cards/boards
Count Board Description
1 H217c 16x x 18 core plane
1 H222A/G652 combo card with 16k x 16/18 bit core plane
2 H3190 test card
1 M920 Unibus jumper
2 M930 Unibus terminator (short version)
2 M981 Unibus jumper
6 M7273 Grant card wit BR & NPG (green handle)
6 M7454 TU80 interface
1 M7518-YM DECQA
4 M7521 DELUA
2 M7546 TK50 interface
2 M7728 RX02 internal controller - B
3 M7744 RX02 internal controller - A
4 M7762 RL11
2 M7810 PC11 (PC05 interface)
14 M7821 Interrupt control
11 M7856 DL11-W (single line SLU, with LTC)
7 M7859 KY11-B (11/34 programmer console interface)
4 M7860 DR11-C
1 M7865 Unibus 2 word out
2 M7891 256Kb memory (12/15 volt selectable)
1 M7946 RXV11 (QBus RX01 interface)
2 M8192 KDJ11-A
2 M8256 RX211 (RX02 interface)
8 M8265 KD11E-A 11/34a Datapath
7 M8266 KD11E-A 11/34a Control
2 M8267 FPU-11 11/34a floating point option with jumper block
1 M8291 CR11/CM11 (card reader interface)
10 M8722 256Kb memory (12 volt)
1 M9200 Unibus jumper
2 M9202 Unibus jumber
2 M9302 Terminator card
7 M9312 Bootsrap & terminator card
1 W130B For Unibus microstep debugging
2 W9512 Wirewrap board, one is unuased, the ather is populated
1 - Unibus/Qbus 2 slot extender card
1 - Unibus/Qbus 4 slot extender card
3 - Unibus cable board for use with 4 standard flat cables (2 needed per backplane to backplane connection)
1 UC17 Emulex single channel Unibus SCSI
1 - 4Mb Qbus memory card, memory chips are socketed.
Large controllers
1 TC11 TU56 controller, has the G888 cards & data cable (red coax), comes with 2 paddle boards for making own control cable.
5 RK611 Complete cardset (5 cards/set)
1 RK611 Backplane for the controller
Other devices
1 - Box of misc M9312 boot proms (device & basic)
2 - 11/34 console with programmer keypad
3 - Ethernet bulkhead (DELUA/DEQNA/DECQA/DEUNA)
1 LA12 Correspondent terminal with manuals & extra ribbon
1 - Unibus voltage margin test kit in suitcase
1 PMK05 Unibus signals display box in suitcase
4 - cover panels / blind panels (plastic/old style) 10" high
4 - idem, half height
1 LA180 Decwriter I with spare internal boards, PSU) Has ther serial interface option.
1 RK07 Drive with extra spare parts, exta internal controller boards, 4 (maybe 5) disc packs, 1x alignment pack
1x RK07 cable to controller, 1x extra HEPA filter (used, but looks clean)
Has it's own corporate cabinet housing with front & backdoor.
1 RX02 Dual drive floppy unit
9 - Boxes with RX02 floppies
1 RL02 Drive with set of slides
1 RL02 drive slides only
1 TU80 (complete, vertical mount, 2 extra internal controller board sets, extra HEPA filter, 2x heads, misc spares etc, extra PSU, cable set.
Comes with 10 - 15 9track tapes.
1 H960 Cabinet with masthead, no side panels
Matching documentation for the cards and devices like Field service
diagrams, User Manuals, Maintenance manual etc. come with it.
Miscellaneous other loose bits & bobs, basically all parts I do not need.
Please note that all of this is in The Netherlands and shipping will be $50 and higher.
I prefer to sell the whole as a lot and open for a reasonable offer, but will also consider smaller lots.
Will add pictures very soon.
Last edited:
