ruthlessperson
Banned
- Joined
- Dec 6, 2009
- Messages
- 30
Hi all, I have a power supply from an 5150 and It won't stay on for then a few milli-sounds enough to slightly spin the fan, then it's dead. I have removed the power supply and tested it with known good system and with no system and with a load like and HDD still nothing so the fault is inside the power supply itself. I don't know if this means anything but I toke the voltage readings from the molex plug and the 5 volt jumped right up to the normal range however the 12 volt did not so well so I am thinking its in the 12 side of the supply unit. I have just a muilt-meter for testing so please try to give simple step by step help. Thanks and have a nice day.
Note the caps look good, no pop tops or anything like that, nothing looks burt or shorted.
Note the caps look good, no pop tops or anything like that, nothing looks burt or shorted.