• Please review our updated Terms and Rules here

Quadram QuadEGA card - jumper settings

Jorg

Veteran Member
Joined
Aug 31, 2003
Messages
1,323
Location
Switzerland
I don't seem to be able to find the right settings for this card.

I found some references to it:
http://stason.org/TULARC/pc/graphics-cards/P-R/QUADRAM-EGA-QUADEGA.html

but the board layout is different
(large pic link)

It has 6 switches instead of four.
If I apply the settings for switch 1-4 as described for the other card, I don't get a picture. It looks on the monitor there is no card connected (full scan)

Anybody knows this version of the card?
FCC ID on the back- D- 2A62L-VEGA
 
Quadram products seem to be very hard to get information for....
I'm still looking for information on their 768k XT ram card short version...
 
Last edited:
switch settings

switch settings

On some of the older video cards with more than 4 switches, the first 4 would be used for the video mode, and the next 1,2 or 3 would be used to set the monitor mode. If this sounds helpful, I can post some links to cards that do this.

patscc
 
On some of the older video cards with more than 4 switches, the first 4 would be used for the video mode, and the next 1,2 or 3 would be used to set the monitor mode. If this sounds helpful, I can post some links to cards that do this.

patscc

Ah, thanks, I will try that. The card in the link only has four- I can apply them to the first four, then there is only 4 things to try left.

//Edit:

Settings for EGA and IBM5154 Monitor:

Quadram QuadEGA rev R1 (not QuadEGA+, it seems)
made in japan 17-9072-01
BIOS chip Quadram 19-2154-01 R7 (c)1985 Video 7
Chipset CHIPS P82C434A 7014-0054 8717EAI

- jumper SL8 on 2-3
- dipswitch settings
dip1/1 off
dip1/2 on
dip1/3 on
dip1/4 off
dip1/5 off
dip1/6 off
 

Attachments

  • Quadram Quadega.jpg
    Quadram Quadega.jpg
    29.9 KB · Views: 3
Last edited:
Back
Top