• Please review our updated Terms and Rules here

Sega TeraDrive [286] with XT-IDE V2 Card

Can you show me boot screen of screenshot when the IBM DOS J4.0-V Rev 4.06 is boot?

I want to know Japanese font.
 
I figure out that how to read Kanji Font from Tera Drive.

At first boot IBM DOS J4.0x you attached.


Then run MKXFONT.EXE, FONT24.EXE and FONT2416.EXE

The files are downloaded from the following url. (.lzh is extracted by WINRAR or LHA)

MKXFONT.EXE

http://www.hmsoft.co.jp/lepton/software/dosv/fontx204a.lzh


FONT24.EXE /FONT2416.EXE

http://ftp.vector.co.jp/pack/dos/writing/fonttool/edit/font24x.lzh


You needs blank disk (1.44MB) after boot DOS J4.0/V

Then run MKXFONT.EXE.
Many of *.FNT must be generated.

If the font is gerenated, then RUN FONT24.EXE and FONT2416.EXE from another blank disk.

Two files are generated.

If you run them on Model 2 and Model 3, thanks.

But if the font is not dumped correct download the following file.

http://www.nanshiki.co.jp/free/fontp10b.lzh


Then run FONTPSE.EXE (for EMS) or FONTPSX.EXE (for XMS)
 
Last edited:
I found Sega TeraDrive uses same Kanji Font with IBM PS/55 and DOS/V 5.0.

http://www.youtube.com/watch?v=k9QFMJ9Xzh0

I've got Kanji ROM dump tool for IBM PS/55 and Sega TeraDrive machine.
(Not from DOS/V's Font)
Unfortunately this tool is not mine and no public. (I didn't get permission from author to upload as public domain.)
So I can't attach or link this file.
 
I really, really apologize for reviving this thread, but could you please upload these files again? I just tried to download them and MEGA says the files have been removed.

Not a prob, I enjoy when this thread comes back to life (albeit because I rearranged some Mega/Google Drive - my bad!)

Here's the new link!

Edit: Added Google Drive to my signature, updated link (again)
 
Last edited:
Back
Top