• Please review our updated Terms and Rules here

Tarbell, Double Density Disk Controller, what Ic's ??

Marty

Veteran Member
Joined
Jul 26, 2009
Messages
3,141
Location
Boulder , Colorado USA
Hi All;

I have a Tarbell Double Density Disk controller, and it never did work for me..

And so I am wondering, If anyone has one..
What Ic's do you have in yours and what Jumpers do You have set in Your Board ??
Especially the WD controller, mine had an F8877 is that correct ??
I know the Documentation calls for a 1793..

THANK YOU Marty
 
Hi All;

Chuck, Thank You for Your Prompt Answer..
Yes, and no..
The IC has MB8877 (plain), No 'A'..
Does, the 'A' make any difference in it's compatibility ??

THANK YOU Marty
 
Hi All;

Thank You, Chuck..
I have downloaded both files.. I will look at them tomorrow..
At present, I am putting in all of the Ic's..

THANK YOU Marty
 
Hi All;

Thank You, Bill, for Your Response..
Unfortunately, we are talking about a different Disk Controller..
You are Referencing the Single Density Tarbell Disk Controller MDL 1011..
And I am Referencing the Double Density Tarbell Disk Controller MD 2022..

THANK YOU Marty
 
Back
Top