masteries
Experienced Member
- Delivery Options
- International Shipping
Greetings,
Today I finished a batch of my minimalistic and Low Cost General Purpose Fujinet v1.6
These are called general purpose, due to the interface its not only dedicated to Atari 8 bits computers
the unit is detachable, a DB15 to SIO (Atari 8 bits), DB15 to DIN6 (C64), DB15 to RJ12 (Coleco Adam), DB15 to DB19 (Apple II)...
allows you to connect the Fujinet v1.6 to each supported (currently or future) computer such Atari 8 bits - Coleco Adam -
Commodore 64 (remember that C64 is not released yet by Fujinet team)
The unit includes all the hardware elements of Fujinet v1.6, also the Coleco Adam interface components.
Via jumpers, you can select the desired operation, if Atari 8 bits SIO or if you desire Coleco Adam Interface.
As well, the unit can be powered externally, or via the SIO interface. There is a jumper to change this selection.
The USB interface is included, in order to update the device.
Microcontroller is the same, an ESP32 WROVER with 16 MB flash and 8 MB PSRAM
A photograph:
-Operating the LC Fujinet v1.6 in an Atari 8 bits ( a bit darkened video, sorry):
-Operating the LC Fujinet v1.6 in a Coleco Adam computer:
I tested the Low Cost Fujinet v1.6 multiplatform version I manufactured
in a real Coleco Adam.
Price of an unit is 59€ (comes with an Atari SIO cable or a Coleco Adam cable);
each additional cable such Coleco Adam or Atari SIO takes 9€ per cable
plus 6€ of tracked shipment to Spain, or 10€ for Europe, or 11€ for USA, or 12€ for rest of the world.
Today I finished a batch of my minimalistic and Low Cost General Purpose Fujinet v1.6
These are called general purpose, due to the interface its not only dedicated to Atari 8 bits computers
the unit is detachable, a DB15 to SIO (Atari 8 bits), DB15 to DIN6 (C64), DB15 to RJ12 (Coleco Adam), DB15 to DB19 (Apple II)...
allows you to connect the Fujinet v1.6 to each supported (currently or future) computer such Atari 8 bits - Coleco Adam -
Commodore 64 (remember that C64 is not released yet by Fujinet team)
The unit includes all the hardware elements of Fujinet v1.6, also the Coleco Adam interface components.
Via jumpers, you can select the desired operation, if Atari 8 bits SIO or if you desire Coleco Adam Interface.
As well, the unit can be powered externally, or via the SIO interface. There is a jumper to change this selection.
The USB interface is included, in order to update the device.
Microcontroller is the same, an ESP32 WROVER with 16 MB flash and 8 MB PSRAM
A photograph:
-Operating the LC Fujinet v1.6 in an Atari 8 bits ( a bit darkened video, sorry):
-Operating the LC Fujinet v1.6 in a Coleco Adam computer:
I tested the Low Cost Fujinet v1.6 multiplatform version I manufactured
in a real Coleco Adam.
Price of an unit is 59€ (comes with an Atari SIO cable or a Coleco Adam cable);
each additional cable such Coleco Adam or Atari SIO takes 9€ per cable
plus 6€ of tracked shipment to Spain, or 10€ for Europe, or 11€ for USA, or 12€ for rest of the world.