• Please review our updated Terms and Rules here

1ST1's latest activity

  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    It's some sort of composite video on different frequency as usual. Maybe only luminance part for greyscale. No, but ETV 2700 is totally...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    Yes, there are differences on the board to provide the Chinch connector for monitor signal and power. The 9 pin is still there but it...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    What would make sense is a riser card for the left side exapnsion slot. This would also fit to the ETV 260 and 3000 if you make it a bit...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    It does not make sense to have a POST diagnostics card for M19 as it's BIOS does not support the port 80h diagnostics port output like...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    Yes, you identified the boxes correctly. The box for the keyboard is also quite thick.
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    No, it is a rebranded M19. Hermes (Swizerland) was owned by Olivetti and sold a lot of devices under Hermes name. There are also...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    I never would have found it using that name! Crazy price.
  • 1ST1
    Can you run the keyboard test in M24 customer test diskette? What does it tell what kind of keyboard is it? ANK-number, Keyboard 1,2 or...
  • 1ST1
    1ST1 replied to the thread Olivetti M19.
    I can't find it.
  • 1ST1
    There is only the user manual, which I found in archive.org. This printer is from MS-DOS times. MS-DOS did not have a centralized...
  • 1ST1
    You have PN.
  • 1ST1
    There used to be some "Bus Mouse" which connected with a Mini-DIN connector to low profile ISA cards... If you can find one as a...
  • 1ST1
    Yes, it's designed for that. Think, it's only 4.77 Mhz without your overclocks. And there is the original expansion box for M19 to plug...
  • 1ST1
    One of my M19 has been modified from a previous owner to have a low profile riser, slots to the left and right. It must be some...
  • 1ST1
    1ST1 reacted to Ghislain's post in the thread Paradise PVC2 questions on Olivetti M19 with Like Like.
    I have design an internal riser low profile. Now I have 3 internal bus. Next step, i design an external riser, with 3 bus, and...
Back
Top