Recent content by nikola-wan

Great work on the 405x Emulator! Here is the 4010 terminal GPLANET converted from PLOT10 format to R12 format shown in COARSE text and graphics mode, compared to the same file displayed in MIXED (coarse text and fine graphics) on the latest 405x emulator: The 2x2 pixels on the COARSE...

And in no time at all @WaveyDipole has updated the 405x Emulator to add a COARSE/FINE pixel size selector below the WINDOW size and emulator SPEED controls in the top left of the Emulator window...

Here is my 4054A screenshot of the two 2001 crew Discussing HAL: There is bright "banding" on the chair cushions and a little bit of "banding" on their cheeks. I believe this is due to the writing beam energy of nearby dots increasing the stored energy of dots already written. I have seen...

Here is my screenshot running @daver2 original Tektronix 4051 emulator with my change to the dots for text characters to double the height and width of each text pixel - but not change the pixels for the lines. I had to go back to this March 2018 version of the 405x web-browser emulator to see...

You can still learn or re-learn something every day🙂 I was trying to figure out why my 4050 BITMAP images were too bright on the 405x Emulator - but running the viewer on the same image on my 4052 and 4054A showed a lot more detail. I figured it out today - I had added a feature to the 405x...

I spent some time building Kerry's GPIB Flash Drive and since I had a new laptop, I had to go back through my instructions on adding the Pandauino board support to the Arduino IDE and found my instructions were not complete. I updated the GPIB Flash Drive User Guide and completely revamped my...

@WaveyDipole updated his fork of the experimental 405x Emulator: He added these features: Added Fractional second resolution to @daver2 's original GPIB Device 2 RTC Added an icon on the top left of the emulator window to change the speed of the Emulator: 1x, 2x, 5x, 10x, 20x, 50x, 100x ...

I also see that I posted the link to the original @daver2 and @Philcogrump Tektronix 405x web-browser emulator - but @Philcogrump's github site for the 405x emulator has not been updated in the last 3 years and @Philcogrump has not posted on vcfed in the last 3 years (I hope he is ok)...

Hi Kerry, I sent you a PM.

During weeks of studying how my 4054A display worked so I could fix it - I ran across a Tektronix Tekniques Vol 5 No 3 article announcing the Option 31 Color Enhanced Dynamic Graphics Display. The article described three different colors: green for normal stored vectors, red for write-thru (or...

I mentioned that my 4054A still has a little bit of "fade positive" on the edges of the CRT - outside the vector drawing area. Chris Curtin (Director of Tektronix CRT Engineering for 26 years) just gave me a tip on clearing up this issue - should work on Tektronix 4051, 4052 AND 4054 computers...

I found out why the "refresh" text was green on two of the test lines by trying to shorten both lines a character at a time I could see that the Option 30 text object must be limited in number of characters or vectors because shortening the lines eliminated the issue. Here is my latest photo...

I believe I have fixed by 4054A bright orange spot and weird retrace line issue! After lots of searching on how the Tektronix direct-view-storage-tube (DVST) works and lots of trial and error troubleshooting, I found a 1M ohm resistor in the High Voltage Power Supply control grid circuit that...

One of my learnings in reading the Tektronix ebooks on Storage CRTs is - the flood guns are what keeps the stored image visible and therefore are very important! The writing gun only works when actually drawing lines or dots on the phosphor - which causes the phosphor to charge slightly...

I made progress on my 4054A display problem today. The 4052/4054A Technical Data Manual -03 has NO description of the 4054 High Voltage power supply. But it does describe the 4052 High Voltage power supply starting on page 11-18 to 11-22 and it describes the Storage Backplate (or faceplate)...