Search results

I have a Micronics 900173 motherboard that I can not get to boot! I have changed power supplies, triple checked jumpers, swapped out cpus, minumalist boot: vga card only: changed vga cards. I have it loaded with 64meg of fpm ram, jumpers selected for it properly. When I turn the power on, a led...

Will a 5X86 work in a PS/2 model 70 486 DX Ubgrade Module 70/80 - 486DX33 Upgrade These little gems were made by Hypertec of Australia. Finally, something good besides beer from Oz. 193-312 Processor Upgrades For Models 70 and 80 (16 and 20MHz) 486A (Model 70) 486B (Model 80) 486/P70...

I have posted here on this topic in the past. I stumbled upon a stanson web page that showed a 386/ 486dlc board capable of having 64meg of ram installed in it? My bios has a setting allowing me to cache up to 64meg of ram in it. I have two banks of 30 pin simms four each, Bank 0, Bank1. I know...

I am trying to get flight sim 5.1 dos to work with this video card. Nt shows the chip being mach 64 and with what I have learned thats what it is. Trouble is that flight sim has a selection for mach 64. How do I dumb down the bios so I dont need linear frame buffers wich is vesa 2.0 which causes...

I have been searching the web for about 15 years if such a creature exisited! It did at on time, only by serendiputy recently did I stumble across the information. google the compaq systempro and you will salvitate all over your self!!!!! When I saw an old dd for infoworld which had a 32mb...

I have a BUSCOMPUTER made in New York City @1992. It is a Hsing Tech Product bios# ami 30-0100-001437-060692-pc chip f. The bios has an advanced chipset setup with some terms I am not familiar with. "Cacheable Ram Address Range", It can go to 64mb . There is also "non-cache Block-1 size" that...