KD2IXL
Experienced Member
Not really sure where exactly this would fit since it is not a dedicated computer. I have a GPIB Board it wanted to use with hpdrive and my 9000/310 instead of using a full desktop setup
This PC104 card for GPIB is one that I needed to get the pinout for, but could never find online. Decided to take a look at the data sheet for the NI TNT882C on the board. And trace out where all the pins go.
I still havent tested it as I need a head for a 26 pin ribbon, but i have no doubt in my mind that it will.
The pinout assuming odds on top and evens on bottom, forgive any formatting issues, but the pinout should be correct.
1 - DIO1 2 - DIO5
3 - DIO2 4 - DIO6
5 - DIO3 6 - DIO7
7 - DIO4 8 - DIO8
9 - EIO 10 - REN
11 - DAV 12 - GND
13 - NRFD 14 - GND
15 - NDAC 16 - GND
17 - IFC 18 - GND
19 - SRQ 20 - GND
21 - ATN 22 - GND
23 - GND 24 - GND
25 - N.C. 26 -N.C.
I will update once I make the cable and test, but I felt putting this out there would be the best if anyone else ever needs the pinout for one of these boards.
I have attached the images of the board, and pinouts incase it helps!
-Ian L.
This PC104 card for GPIB is one that I needed to get the pinout for, but could never find online. Decided to take a look at the data sheet for the NI TNT882C on the board. And trace out where all the pins go.
I still havent tested it as I need a head for a 26 pin ribbon, but i have no doubt in my mind that it will.
The pinout assuming odds on top and evens on bottom, forgive any formatting issues, but the pinout should be correct.
1 - DIO1 2 - DIO5
3 - DIO2 4 - DIO6
5 - DIO3 6 - DIO7
7 - DIO4 8 - DIO8
9 - EIO 10 - REN
11 - DAV 12 - GND
13 - NRFD 14 - GND
15 - NDAC 16 - GND
17 - IFC 18 - GND
19 - SRQ 20 - GND
21 - ATN 22 - GND
23 - GND 24 - GND
25 - N.C. 26 -N.C.
I will update once I make the cable and test, but I felt putting this out there would be the best if anyone else ever needs the pinout for one of these boards.
I have attached the images of the board, and pinouts incase it helps!
-Ian L.