NobodyIsHere
Veteran Member
- Joined
- Dec 21, 2006
- Messages
- 2,410
Hi! I've partially built one of the unit for testing. I've gone as far as I can go but some parts are on back order. I may try to pick up some locally next weekend. What I am missing are the power connectors (0.200" spaced headers male and female). My plan is to finish assembly and test the active terminator section before installing the S-100 connectors.
Two of the eight units for initial testing have already been spoken for. If you would like your own S-100 backplane please contact me. The PCBs are $32 each plus $2 shipping in the US. Shipping overseas is typically $5 per PCB.
Some people have been concerned about availability of the S-100 connectors but they are plentiful and relatively cheap. At Mouser you can get EDAC parts which should work for $5 each. You can also substitute wire wrap connectors which sometimes can be found on eBay for $3 each.
There are photos at the wiki here
Thanks and have a nice day!
Andrew Lynch
Two of the eight units for initial testing have already been spoken for. If you would like your own S-100 backplane please contact me. The PCBs are $32 each plus $2 shipping in the US. Shipping overseas is typically $5 per PCB.
Some people have been concerned about availability of the S-100 connectors but they are plentiful and relatively cheap. At Mouser you can get EDAC parts which should work for $5 each. You can also substitute wire wrap connectors which sometimes can be found on eBay for $3 each.
There are photos at the wiki here
Thanks and have a nice day!
Andrew Lynch