tempest
Veteran Member
I know that you need to add a line to the config.sys to properly format a 720K 3.5" disk on an IBM 5150, but the command listed here (http://minuszerodegrees.net/5150_5160/720k/5150_5160_720k_driversys.htm) assumes that the 3.5" drive is the A drive. How do you modify this command if the 3.5" drive is the B drive?
DEVICE=C:\DOS\DRIVER.SYS /D:0 /F:2
DEVICE=C:\DOS\DRIVER.SYS /D:0 /F:2