Al Kossow's latest activity

Not really. Have you ever looked at the code?

not shure how I missed this, yes I'm still looking though it has been pushed way down the project stack

It is a truly awful design. I left their discord after they clearly care about 'cheap' and not 'works'

my pet theory.. it was done by someone that is left-handed. the cut was done with a hacksaw from the back, they sawed through a bit of...

one can only hope they kept a copy of the sources

an analysis of how the board was broken on twitter

MIT CADRs are probably up there as well. I don't know of any having sold recently though. Just a CADR keyboard is probably in the top...

A Xerox Alto, if you are talking about a personal computer. Twiggy Lisas are third, with prices in the low five-figures. I can't think...

H19s emulate a VT52

"advances were being measured in months or even weeks" fast forward 50 years, and thanks to the web that has been cut down to literally...

"3D printer with the bed set to 40c" will not do a damn bit of good without air circulation other than warping the reel

> A tape glued itself to the head I hope there is nothing on the tapes that matters I've been doing this for decades, and it really...

https://github.com/brouhaha/tapeutils/ just beware that SCSI tape drives do not recover the data inside of a bad block use the...

Prolog STD 56-pin? Don't know if cards are still made, though.

http://bitsavers.org/pdf/dec/powerSupply/MP00272_H785_Field_Maint_Printset_197612.pdf