Starting to clean out stuff I will likely not use, so here it goes (all $5 each + whatever USPS Flat rate shipping they fit in) Or get the whole lot for $55 shipped free:
NIC Cards
3x 3C905TX 2-Rev A, 1-REV B
1x 3x905B, REV A
1x Apple Broadcom NIC
SCSI Cards x 4
Sound Cards
1 Sound...
Looking for the interface card that goes with the Modular Circuit Technology MCT-EP1 EPROM programmer. I have the box, and it has a 40-pin connector that uses a ribbon cable it appears. Did a bunch of googling and no luck.
Anyone have any troubleshooting tips for a 1000RL PSU suddenly no longer working? No idea what happened. Was working, turned it off then when I went to turn it back on nothing. It never popped, or anything. All the capacitors look OK.
I have a Tandy 1000RL Hard drive. Been a while since I got it, and I finally plugged it in, and the HD needed a tap to start spinning, but t appears to work, at least as far as I can currently test. Current problem is that I do not have a keyboard that works with it. It has a PS/2 connector...
I am looking for a version of Palm Desktop that will run on my Macintosh Centris 660AV with System 7.6.1 installed on it. I have 2.6.3, but that needs a PPC macintosh. I suspect an earlier version will work with a 68K machine.
Thinning out my collection.
IBM 5160 XT with Fill Height 5 1/4" floppy, 32MB(??) hard drive, 640K, and keyboard. Works. has MS-Dos 3.3 installed on it.
$100 plus actual packing and shipping costs from 13424. I can take some more photos if interested. I will have it packaged by the local...
I am going to start to learn assembly language programming for X86. I have a few good books as reference, and I plan on going pure vintage on this and use an older machine to do everything, either a 386, or my IBM XT. I was planning on using TASM 5.0 since I have a copy of that. Since am new...
So I am looking to assemble a 386 or 486 desktop. I have some of the components already floading around from saving things over the years. Main thing I am missing is the motherboard and the case. So I am wondering if any of the new cases and and power supplies out there are compatible with...
I have been watching the show "The Americans". Time frame is Regan Era, and they have had verious computers as props in the show. A couple of shows they have shows computers inside the Russian HQ or embassy or something like that, and it seems unique, well at least to me. It has a large case...
I finally got my SE/30 up and running, but somewhere along the way I lost the screws to the case, the Torx head screws. Anyone know what a replacement tread/size screw will work?
I have been playing around with a G3 MAC I rescued from the trash, and it works pretty good. I got OS 9.2.2 installed on it, and I am wondering if I can somehow print to a shared printer. The printer is shared on a Windows 2000 server machine. I can see the printer in Chooser, but of course...