Shadow Lord's latest activity

So I found a copy of these utilities and the tool is for window 3.1. Was there a pure DOS version as well?

Thanks will take a look.

Have you tried Adaptec's own site? Believe it or not the support pages are still up after multiple take overs. I am not sure if they...

Thanks. I had already checked out the LSI tools and except for their LLF program all the other tools either require a LSI controller to...

doshea, Thanks for the info. I will look at them but they may end up in the next iteration of the disk. I need to do some fine tuning...

o.k. so no other recs for a diagnostic and/or informational utility or other useful programs to put on a DOS boot disk, to test SCSI...

Are you talking about ASPICAM.SYS? Isn't the point of that to have ASPI compliant SW talk to CAM HW? I would think I would need a CAM to...

Chuck, I am using an Adaptec controller so ASPI all the way. I guess the caveat would be that I would need tools that work with ASPI or...

Thanks and yes I am staying on DOS. Basically, I am running these on a 486 w/ an EISA Adaptec SCSI Controller. I have a cable for 68pin...

I have a few of these (both ISA and PCI version which emulates VGA). Cool little boards. Thanks for uploading the ISA version of the...

In what way? I don't need access to the drives per se as much as I need to be able to run diagnostics. SCSI by its nature is supposed to...

I have tried reaching out multiple times to see if I can register and the author has never responded. If you get in touch or find a way...

Hello All, I am trying to setup my own personal SCSI diagnostic/management boot disk and/or CD and wanted to get suggestion of...