Thanks alank2. I found that. What I need and cant find is the escape sequences for the Kaypro so I can enter them into TINST and configure it so it works.
Anyone have the keyboard escape sequences?
Thanks!
OK yes CTRL-E is Line UP that works.
The problem is Line Down Control X doesn't work.
The UP and Down arrows also don't work. However the arrows to move left or right work. So its something strange with Turbo Pascal.
In Wordstar CTRL_X does move the cursor to the next line down. Also the UP...
Thanks! Ctrl-k to move up a line is the only thing that doesn't work.
So if anyone knows how to go up a line in Turbo Pascal beside Ctrl- K I would appreciate it!
THanks!
I have a Kaypro 4 and when I install Turbo Pascal 3 the only options for Kaypro is Kaypro with HiLite and Kaypro without HiLite.
I tried both and many of the CTL combonations don't work. For example CTL-K does nothing except display CTL-K in the upper left hand corner of the screen.
So to make...
Thanks for the Help! Just pulled out my Kaypro 4 and looked at all my original disks and no FORMAT command. But Tommar mentioned the copy command. And sure enough once I ran copy I was able to format a disk!
Thanks Tommar!
Guys I have fixed it! I download the PET emulator and took the 4032 60HZ Edit ROM bin and burned it to a 2716 and it works! So the Edit ROM 901499 on Zimmers.net that I downloaded doesn't work.
Yes I have Basic 4. I dumped the PET edit rom which is 901498-01 and burnt it to a new 2716 and it works. So the problem is the 901499 that I downloaded from Zimmers
Thanks for your reply!
The machine works perfect!
All I am trying to do is change the edit ROM from 50hz to 60hz. My pet has the normal 50hz masked ROM and I want to know how to replace the PET EDIT ROM with an EPROM
THanks1
Hello everyone!
Just got my first PET! Its a 4032.
Does anyone know if the Edit rom can be replaced with an EPROM?
I downloaded the 60HZ edit ROM bin UD7 from Zimmer.net and programmed it into a 2716 but the PET wont even boot.
I know the EPROMS are good as I programmed the SPACE font into...
Hello Everyone,
I got a complete NEC PC-8001 system but the manuals don't include pinouts for the 8 Pin DIN RGB cable. My system included a cable with 8 pin DIN to 9 pin DB9.
So I plugged it in to my CGA to VGA converter and monitor displays NO SIGNAL
Anyone know the pinouts and how to get...