Search results

I wouldn't be surprised if it was OEM from someone like Diablo. Try dumping the ROMs. I found a few bits of info. Not sure what you're looking for: Creative Computing review, https://www.atarimagazines.com/creative/v11n5/39_Juki_6300_daisywheel_kee.php Chicago Tribune review...

Would anyone be interested in a Nokia N800? Won't go into specs, there's plenty around, but it was a table from around 2007-ish that was popular for about 10 minutes. While cleaning, I found mine in it's box and it still works. There's no SD card, and for some reason, the power adapter cable was...

Well, the main thing I was interested in was a system with a keypad front panel. Not sure if any of the Q-bus stuff ever did. But given the seeming scarcity of any PDP-11, I would say beggars can't be choosers. I'd even "settle" for a Pro-350, altho the 350 is pretty sweet also. * I did see a...

For what it's worth, I was able to install FreeDOS on my Book8088. I had to build a virtual 86Box machine, which got me very close to the Book hardware, and then I dd'ed the virtual disk image to a CF card...

I figure my chances are slim, but. I am looking for a PDP-11, an 11/34a or its smaller brother, the 11/04; e.g. the ones with the hex keypad. I'll settle for just a CPU, but more would be welcome. I used to have several PDP-11s. The best one was an 11/8x, and even tho it may be one of the more...

I'll attach some extra pictures. One, hv.jpg, is the power supply board, what I referred to have the HV board. Also two pictures of the main board. One is the top side, and the thing that is standing perpendicular to the board is what's left of the battery. The corrosion also lead to the...

I recently picked up a GTE XT300 dumb-ish terminal. I say "dumb-ish" because while it seems to be an RS232 terminal, it also has a built-in modem of some sorts. As things would have it, it has serious damage to the main logic board. There was a battery which either exploded or simply leaked...

Considering offering my P112 system for trade. It is a fully working P112 with a GIDE interface, a 128mb CF card, one single floppy, in some random enclosure I found. Near as I can tell, I built it around 2012. It's been kinda sitting around; seems I get more fun out of building, repairing, or...

Quite some time ago, I acquired a 1541 drive in the infamous "unknown working" condition. As luck would have it, it was non-working because there was something physically wrong with the main board. It's been a few years that it's been laying around, so I don't remember if it was cracked, burned...

I normally don't blink twice when I see cluebies posting ludicrous things on ebay, much less would post it here, but this one takes the crown and I think laughworthy enough to share. Behold, a copy of AOL 0.0, also known as Q-Link, for $2,000...

I have an Atari 800 which has been sitting in the box since I received it a few years ago. I just don't have much interest in the Atari 8-bits. I tried to offer it here for trade last year or so, but the deal just didn't work out, so I'll try again. You can see an image at...

I've got an Atari Mega STE with a 100mb SCSI drive that is on the way to the graveyard. It keeps reporting write errors and other troubles. I'd like to find an era-compatible drive for replacement. It would need to be less than 1gb, have either no parity or parity that can be disabled (the Atari...

Has anyone seen these: http://www.ebay.com/itm/C64-SD-card-SDrive-1564-SD-card-interface-Commodore-computers-1541-emu-/111044233815 It's Yet Another SD Adapter For Commodore, but there's not a lot of technical details about it. I don't know if it is based on the sd2iec firmware that the rest...

I'd like to acquire a set of Atari compatible paddles. These are the types that have two paddle controllers connected to a single joystick connector, not the kind called "Driving paddle", which only has a single paddle controller. I've been perusing the offerings on eBay, but I'm not really in...

I have a Turbo Chameleon 64 (http://www.syntiac.com/chameleon.html) which I actually find myself disinterested in. Rather than going thru the e-bay thing, and since (as a collector) I am more likely to just spend the money on more stuff, I'll offer it here first. It works fine, altho the...

I just noticed that my PET 4032 has a ROM installed in UD12, which is supposedly an expansion ROM slot at $9000. Curious, I did "SYS (9*4096)" and it returned: (C)1980 BRAD TEMPLETON READY. As best as I could pin down, this is either PAL (which appears to be an assembler) or something called...

I have a PET 4032 with the "graphics" keyboard. It's a Fat-40 with CTRC. I'd like to use a "business" keyboard layout (which has number keys at the top row, rather than symbols, much like a normal keyboard). I've found that keyboard decoding is part of the "edit ROM", and there were several...

This isn't mine, and if it were, well, it probably wouldn't be on ebay. But I don't have this kinda throw-away money... http://www.ebay.com/itm/KENBAK-1-Computer-/320977280254 I know it's a replica, but even so.

Got a 1541 with a strange (to me) problem. When connected to a computer, even while the drive is powered off, it does "something" strange to the serial buss, and causes any other device on the buss to fail. I plugged it into an SX-64, but did not power on the 1541, because I needed to change...

I am looking for an Atari Falcon memory upgrade to 14/16mb. Best Electornics has the Wizztronics one that uses SIMMs for $100, less the actual SIMM module. I'd prefer to see if I can find something cheaper first, so I'll ask here first. The Falcon memory pinouts are almost 1:1 to a 72 pin SIMM...