Some 3Com Etherlink II cards are available on ePay.
These cards are 8 bit PC bus cards, and will work in your PC 5150 or XT 5160. (And of course you can use it on later AT bus machines, but it's only an 8 bit card.)
You will need an external 10BT tranceiver to hook it up to your more modern hub or switch, or just use the BNC connector on the back for Thinnet.
These don't come up to often .. If you're looking to get your old rig on your network, this is what you need.
Mike
These cards are 8 bit PC bus cards, and will work in your PC 5150 or XT 5160. (And of course you can use it on later AT bus machines, but it's only an 8 bit card.)
You will need an external 10BT tranceiver to hook it up to your more modern hub or switch, or just use the BNC connector on the back for Thinnet.
These don't come up to often .. If you're looking to get your old rig on your network, this is what you need.
Mike