Old Thrashbarg
Veteran Member
I've been going by the guide here, trying to get transwarp over to my A500 using a null modem and the TYPE command, but I have been unable to find any success.
The best I've gotten is that something transferred, but it always comes up with a "file is not an object" error. I've tried a couple different cables, and pretty much every combination of settings for the PC's COM port, but to no avail.
The issue could be related to my serial port settings, but the Preferences pane on my WB 1.2 disks lacks the more advanced serial options... the only setting I have available is baud rate... and I'm not sure what the Amiga's defaults are for flow control, etc.
Could someone help me out here? I don't know what else to do... Google searching returns some discussions on the subject, but all of them either end with no solution or with someone getting it working then never posting back about how he did it.
The best I've gotten is that something transferred, but it always comes up with a "file is not an object" error. I've tried a couple different cables, and pretty much every combination of settings for the PC's COM port, but to no avail.
The issue could be related to my serial port settings, but the Preferences pane on my WB 1.2 disks lacks the more advanced serial options... the only setting I have available is baud rate... and I'm not sure what the Amiga's defaults are for flow control, etc.
Could someone help me out here? I don't know what else to do... Google searching returns some discussions on the subject, but all of them either end with no solution or with someone getting it working then never posting back about how he did it.