andromeda92
Experienced Member
Hi,
I have two motherboards 286 12mhz with 16bit isa port.
1er:
wd286-lpm
2eme
KT216WB
XT-CF Lite 4.1 8bit ISA work fine on this two motherboard, but
this controller ISA16 bit not work, on this two motherboard.
Goldstar prime 2c
LCS-6624G
Is it possible that those controller cards don't work on an AT 286 motherboard?
these two cards work on a 486, the jumpers are well configured so the bios parameters of the two cards.
on the first motherboard I already have a connector FDD, 2 serial port and a parallel port but on the second I need an I/O controller for the diskette, serial port and parallel port.
Do I have to take an I/O card for the second card in ISA 8 Bit?
What kind of I/O controller card do I need for a 286?
Thank you for your help.
I have two motherboards 286 12mhz with 16bit isa port.
1er:
wd286-lpm
2eme
KT216WB
XT-CF Lite 4.1 8bit ISA work fine on this two motherboard, but
this controller ISA16 bit not work, on this two motherboard.
Goldstar prime 2c
LCS-6624G
Is it possible that those controller cards don't work on an AT 286 motherboard?
these two cards work on a 486, the jumpers are well configured so the bios parameters of the two cards.
on the first motherboard I already have a connector FDD, 2 serial port and a parallel port but on the second I need an I/O controller for the diskette, serial port and parallel port.
Do I have to take an I/O card for the second card in ISA 8 Bit?
What kind of I/O controller card do I need for a 286?
Thank you for your help.