Pekopome
Member
****Update! Found the solution here! http://minuszerodegrees.net/5150_516..._beeps_1_1.htm****
Hey guys. Haven’t turned my 5155 on for a couple of years. When I did it turned on for 4 seconds and went dead. The PSU fan does a half spin and then nothing. But when I unplug P8 power cable on the motherboard the PSU comes to life and turns on the (flickering screen) But of cause nothing happens beside that. Have tried to detach everything from the motherboard expect P8 and P9. But still get nothing when P8 is attached. When only P9 is attached and nothing other it gives me a lot of error beeps. Of cause suspecting a blown capacitor. But I cant see anything. When P8 is the problem does any of you have any advice of where to narrow down the fail? Can it still be the PSU that candy handle a type of voltage or?
Best / David
Hey guys. Haven’t turned my 5155 on for a couple of years. When I did it turned on for 4 seconds and went dead. The PSU fan does a half spin and then nothing. But when I unplug P8 power cable on the motherboard the PSU comes to life and turns on the (flickering screen) But of cause nothing happens beside that. Have tried to detach everything from the motherboard expect P8 and P9. But still get nothing when P8 is attached. When only P9 is attached and nothing other it gives me a lot of error beeps. Of cause suspecting a blown capacitor. But I cant see anything. When P8 is the problem does any of you have any advice of where to narrow down the fail? Can it still be the PSU that candy handle a type of voltage or?
Best / David
Last edited: