• Please review our updated Terms and Rules here
  • From now on we will require that a prefix is set for any items in the sales area. We have created regions and locations for this. We also require that you select a delivery option before posting your listing. This will hopefully help us streamline the things that get listed for sales here and help local people better advertise their items, especially for local only sales. New sales rules are also coming, so stay tuned.
  • Exhibitor application for VCF West 2022 is now open! If you are interested in exhibiting, please fill out the form here.
  • Here are the results of the VCF East 2022 Post Event Survey: Survey Results

IBM PC AT 8MHz with 287, 640K base, 1920K Extended RAM, VGA

wrljet

Experienced Member
Joined
Oct 31, 2008
Messages
165
Location
Maryland
I need to unload an IBM PC AT. Nice clean restored system. Make offer.

Pictures: http://www.wrljet.com/PCAT/

Due to size and weight (almost 50#), cost of shipping, and most of all my laziness,
this is LOCAL PICKUP ONLY in Bethesda, Maryland USA. (right off the DC Beltway)

All parts have been washed or were new or like new when I got them.
Power supply, etc. all disassembled and carefully washed with distilled
water and forced hot air dried. Case is in good condition, good paint,
and no corrosion.

8 MHz 512K motherboard

80287 Math chip

RAMPage 286 memory board, fully populated with 2MB

Tseng Labs VGA

Serial/Printer board

DTC disc controller
1.2MB and 360K floppy drives
Maxtor hard disk, 1224/7/36 layout, 151MB

Disk has a 30MB partition on it with PC-DOS 3.30.
Spinrite is on the disk.

BIOS updated, with built-in CMOS setup pgm.
Pictures include a shot of the setup pgm
(original BIOS ROMs are included)

Several spare AT motherboards (working) and other adapters included.

No key for the front panel lock, and no plastic vanity piece for the rear panel.

Due to size and weight, cost of shipping, and most of all my laziness,
this is LOCAL PICKUP ONLY in Bethesda, Maryland USA. (right off the DC Beltway)

If interested, want more info or want to make an offer, please send me a private msg.

-Bill
 
Top