Anonymous Freak
Veteran Member
Longshot, but does anyone have an IBM PS/1 "Adapter Card Unit" front bezel spare? Or at least one they can get high quality photos of all sides so I can 3D print a replacement?
I got a PS/1 2121 with both the 5.25" drive expansion and the ISA card expansions, but the ISA expansion chassis is missing the bezel.
(My 2121 is the "single height" unit without internal ISA slots, the Adapter Card Unit is the one shown here on top of the main unit: . There were 2121s available as "double height" that had what I presume is the same riser card completely internal to the main double-height chassis. I do not have that one.)
I got a PS/1 2121 with both the 5.25" drive expansion and the ISA card expansions, but the ISA expansion chassis is missing the bezel.
(My 2121 is the "single height" unit without internal ISA slots, the Adapter Card Unit is the one shown here on top of the main unit: . There were 2121s available as "double height" that had what I presume is the same riser card completely internal to the main double-height chassis. I do not have that one.)