"JCC IOS-2" floppy/multi-IO/clock 8bit ISA card ... jumper settings needed

[stynx]

The settings are:

COM1: 3F8h
LPT1: 278h
gameport: 201h
clock: enabled
bios: CA00-CC00

J1&J2 seem to be LPT related

J3&J4 are most likely COM related

J5, J6, J7, J8?

J9: enable floppy controller?

The bios has a soft-set for the floppy-type (360k, 1.2m, 720k, 1.44m). it remembers the setting until the battery is removed.

 

[stynx]

I found a similar card with the same ASIC (D-82 / D-802).
https://th99.classic-computing.de/i/I-L/50254.htm

The JUKO M16-X has a jumper block (J10) for rom address-selection that my card is missing. The configuration Is a bit different as well. J6 and J7 are swapped and the method of enabling/disabling the floppy is inverted (seemingly). Otherwise the cards seem identical.

https://www.vogons.org/viewtopic.php?t=78937