Kaypro 10/83 and WD1002-HD0

[Frank S]

I have two WD1002-HD0 and one RMT1002-05 controller.
Both of the WD1002-HD0 shows "System Status 02" in the lower left corner of the screen.
But all operations working fine. With the RMT1002-05 i don't get the "System status 02" message on the screen.
I changed the WD1010 chip on the WD1002-HD0 with a new one, but nothing changed then.
What does the "System status 02" means exactly and what i have to do.
Frank

 

[phogren]

If you look in the Kaypro 10 user's guide near the end it might help. Pages 94 and 95. I have found a reformat usually will help.
link to the user's guide:
http://chiclassiccomp.org/docs/content/computing/Kaypro/Kaypro10UsersGuide.pdf

 

[Frank S]

Thanks Phogren,
i reformat (lowlevel) the hard disk with the WD1002-HD0 and everything is fine now.

Frank