Turbo_Gecko
New Member
- Joined
- Nov 27, 2023
- Messages
- 4
I have uploaded to my GitHub page the setup I am using for transferring hex files via serial port to the MPF-1.
It includes 1 custom board, a couple of 'off the shelf' cards and the 6850 ACIA driver and hex-load software to burn into an EPROM for U7.
Information at https://github.com/turbo-gecko/MPF/tree/main/Software/Hex Load
It includes 1 custom board, a couple of 'off the shelf' cards and the 6850 ACIA driver and hex-load software to burn into an EPROM for U7.
Information at https://github.com/turbo-gecko/MPF/tree/main/Software/Hex Load