Digitalman
Experienced Member
- Joined
- Sep 12, 2018
- Messages
- 72
Trying to figure out why my BlueSCSI is not working. (Not sure the version but it's an STM controller)
Pentium 133 MoBo running Windows 98.
Tried two different SCSI cards: Adaptec AHA-1510A(ISA) and AHA-2930 (PCI)
The images are mounting ok according to the LOG file. The 2930 BIOS hangs while scanning the LUNs and eventually produces a timeout message. If I change the LUN ID (say from 0 to 1) then adapter will hang when it reaches that LUN number. Tried different images sizes, and tried exFAT and FAT32 SD cards. Termination on/off.. same results. Updated the firmware, same results.
Anyone know if this is supposed to work? Any ideas? Thanks!
Pentium 133 MoBo running Windows 98.
Tried two different SCSI cards: Adaptec AHA-1510A(ISA) and AHA-2930 (PCI)
The images are mounting ok according to the LOG file. The 2930 BIOS hangs while scanning the LUNs and eventually produces a timeout message. If I change the LUN ID (say from 0 to 1) then adapter will hang when it reaches that LUN number. Tried different images sizes, and tried exFAT and FAT32 SD cards. Termination on/off.. same results. Updated the firmware, same results.
Anyone know if this is supposed to work? Any ideas? Thanks!
Last edited: