jh1523
Experienced Member
It's possible... but I'd have to configure the memory with jumpers, and without a reference it looks like quite a project.
Here's a high-res picture of the board (2MB file)
http://img4.imageshack.us/img4/1143/img5577p.jpg
There's the other/64k jumper (now in the "other" position), then there's the block of 9 jumpers without any markings... unless the "64k/256k DRAM" inscription is related to them, as (possibly) the "1M DRAM" notation below them as well...
Then there are the 4 switches in the block of 8 at the bottom, labeled "DRAM"
Here's a high-res picture of the board (2MB file)
http://img4.imageshack.us/img4/1143/img5577p.jpg
There's the other/64k jumper (now in the "other" position), then there's the block of 9 jumpers without any markings... unless the "64k/256k DRAM" inscription is related to them, as (possibly) the "1M DRAM" notation below them as well...
Then there are the 4 switches in the block of 8 at the bottom, labeled "DRAM"
Last edited: