Replacement cooling fans for Toshiba T3200

[Tom_of_Åland]

Hi all,
I have two working T3200 and one parts machine, and I'd like to get the working ones a bit less noisy. So I wanted to replace the 3 fans it has inside.
But I'm struggling to find anything that fits, so wanted to ask if anybody has done the same swap?

Original fans are branded "Wind Ace" brushless model D40M12. It's DC12V and 0.05A.
Physical size is about 35x35x15mm

Any leads on a good fan would be much appreciated!

TIA,
Tom

 

[twolazy]

This could make a decent replacement, its 10mm thick but still 35mm x 35mm and 12v

12V 35mm New Cooling Case Fan 35x35x10mm 3510 DC PC Computer 3D Printer CPU 2pin | eBay

Size: 35x35x10mm. GDT DC 12V Brushless Cooling Fan 35 35x10mm 3510S. Fan speed: 11000±10%rpm. Bearing Type: Sleeve. Rated current: 0.08±10% Amp.

www.ebay.com

 

[Tom_of_Åland]

This could make a decent replacement, its 10mm thick but still 35mm x 35mm and 12v

12V 35mm New Cooling Case Fan 35x35x10mm 3510 DC PC Computer 3D Printer CPU 2pin | eBay

Size: 35x35x10mm. GDT DC 12V Brushless Cooling Fan 35 35x10mm 3510S. Fan speed: 11000±10%rpm. Bearing Type: Sleeve. Rated current: 0.08±10% Amp.

www.ebay.com

Yes they look good. But the shipping cost is a killer, I also have a 24% vat when items arrive and I have to do customs clearance, so total for 3 tiny fans would be approximately 3.60+20 = 23.60 x3 = 70 + 24% = 86 Euro.

 

[shawnerz]

Hi all,
I have two working T3200 and one parts machine, and I'd like to get the working ones a bit less noisy. So I wanted to replace the 3 fans it has inside.
But I'm struggling to find anything that fits, so wanted to ask if anybody has done the same swap?

Original fans are branded "Wind Ace" brushless model D40M12. It's DC12V and 0.05A.
Physical size is about 35x35x15mm

Any leads on a good fan would be much appreciated!

TIA,
Tom

I have two fans if you want them. PM me if interested.
Thanks,
-Shawn