jodyspencer
Member
Hello All after many years away from my trs 80's .. I have a nga that works fine and one i acquired a while back .(GA) . the previous owner tried taking the top off and broke and imploded the CRT neck.. I substituted.. my top from the NGA with the crt board and crt .. but get no display the crt will light up but nothing on it .. I did the enter wait 10 sec type CLOUD enter and break and I get a click each time.. what does this tell me and what else can I do to further troubleshoot .. also the GA had a different CRT board than the NGA I substituted .. would this cause it not to display .. also you can hold down the break key and turn the unit on and the disk will spin briefly then stop like its possibly trying to display cassette,, but if you just turn it on it will operate drive 0 but keeps spinning ....if I put a disk in it will spin up and then stop like it was loading then stopped .. but it seems to load a long time longer than normal .. and help would be greatly appreciated